Overview
The Baer Brakes 6920325 is a 12 inch, two-piece, plain-finish right replacement brake rotor for select Baer Brake systems. It is a vented cast iron rotor ring with a 12-bolt pattern on a 7.5 inch bolt hole circle, sold individually.
The rotor is a vented cast iron ring with curved vanes that aid cooling, and it is dynamically balanced for smooth running. The surface type is plain. The brake surface is directional, so the rotor is made for the right side of the vehicle only.
Key features
- Two-piece construction with a plain surface type
- Vented cast iron ring with 1.1 inch nominal thickness
- Curved vane design that Baer describes as optimum for cooling
- Directional brake surface made for the right side only
- Dynamically balanced for vibration-free performance
- Twelve mounting bolt holes on a 7.5 inch bolt hole circle
Choosing and fitting a brake rotor
A brake rotor is the disc the pads clamp against, so its surface, thickness and mounting pattern all shape how the brakes feel and how long they last. Vented rotors have an internal air gap between two faces, which helps move heat away during repeated stops. On the trail this matters most on long descents, where the brakes are used again and again. Off road, mud and grit can wear a plain surface faster than a smooth street rotor, so look at it after each outing.
Rotors rarely wear alone. Pads, caliper hardware and wheel bearings are commonly checked at the same time, and worn pads should be replaced before the disc is worn through. If the vehicle has been lifted, lowered or fitted with larger tires, confirm that the caliper still clears the rotor and that wheel offset is correct for the new setup.
- Check the disc for scoring, cracks or a lip at the outer edge
- Measure thickness against the minimum stamped on the rotor
- Clean the hub face so the rotor sits flat against it
- Torque lug nuts in a star pattern and re-check them after the first few stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920325 |
| UPC | 844165012368 |
| Construction | Two piece |
| Axle side | Right |
| Surface type | Plain |
| Brake surface | Directional |
| Solid or vented | Vented |
| Material | Cast iron |
| Grade type | Performance |
| Outside diameter | 12 inch |
| Nominal thickness | 1.1 inch |
| Mounting bolt hole circle diameter | 7.5 inch |
| Mounting bolt hole quantity | 12 |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
This rotor is made for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install the rotor on the right side only, since the brake surface is directional. Because the rotor is sold individually, a matching left-side rotor is needed for the opposite wheel. The ABS tone ring is not included, so check your system’s requirements before fitting. Have a qualified technician check the installation of this brake component.
What’s included
One right-side two-piece rotor ring, sold individually.
Not included: the left-side rotor, brake pads, calipers, and any ABS tone ring.
