Overview
The Baer Brakes 6920974 is a 14 inch, 2-piece right-side replacement rotor ring with a slotted, drilled and zinc-plated surface, made for select Baer Brake systems. It has 12 mounting holes on a 9.45 inch bolt circle and a 0.75 inch nominal thickness, so measure your hub pattern against these figures before buying.
The rotor is a two-piece vented cast iron design, with the friction ring as a separate component. It is directional and made for one side of the vehicle. The slotted and drilled face suits owners who want that look and surface. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Slotted, drilled and zinc-plated surface.
- Two-piece construction with a separate rotor ring.
- Right-side directional design, specific to one side.
- Curved vanes that Baer says aid cooling.
- Dynamic balanced for vibration-free running.
Pads and bedding considerations
A slotted and drilled rotor changes how the pad and face interact. Slots help clear debris and gas from the pad surface, while drilled holes add venting for heat, but the pad compound needs to suit that surface. Many owners choose a pad rated for performance use so the friction ring wears evenly and the face does not glaze.
Two-piece rotors have a separate friction ring riding on a hub carrier, so inspect the ring mounting hardware and the carrier contact surfaces at each pad change. Look for cracks around the drilled holes, uneven wear across the face, or a pulsing pedal under braking. Any of these signs means the rotor should be inspected before further use.
- Replace pads and rotors as a matched set where possible
- Check runout with a dial indicator before fitting
- Clean the hub face and mounting surface before installation
- Re-torque the lug nuts after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920974 |
| UPC | 844165037545 |
| Outside diameter | 14 inch |
| Nominal thickness | 0.75 inch |
| Mounting bolt hole quantity | 12 |
| Mounting bolt hole circle diameter | 9.45 inch |
| Construction | Two piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Axle | Right |
| Surface type | Slotted, drilled and zinc plated |
| Material | Cast iron |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is designed for select Baer Brake systems. Fitment to specific makes, models or years is unknown for part number 6920974. Confirm fit for your vehicle’s year, model and trim before ordering.
This is a right-side rotor and should not be used on the left. Confirm the 12-hole, 9.45 inch pattern against your hub. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The ABS tone ring is not included, so confirm whether your setup uses one before ordering. The rotor is directional, so match the right-axle designation to the right side of your Baer system. Have a qualified technician check the mounting and fitment before the vehicle returns to the road.
What’s included
One 2-piece rotor ring, sold individually.
Not included: ABS tone ring, brake pads, calipers and other brake hardware.
