Overview
The Baer Brakes 6910865 is a left-side, 1-piece slotted replacement brake rotor with a 14.000 inch outside diameter and a 1.150 inch nominal thickness. It is a service part for select Baer brake systems and is directional, so it is built for the left side of the vehicle only. The rotor is a vented, full cast iron disc, the surface a brake caliper clamps against to slow the wheel.
The casting is made from premium materials, with a curved vane design for cooling and a construction built for rotor stability and resistance to distortion. Each rotor is dynamically balanced for smooth running. It is a performance grade part, sold one rotor per part number, so a right-side rotor is needed to replace both sides of an axle.
Compare the 14.000 inch diameter, 1.150 inch thickness, six-stud pattern on a 5.50 inch bolt circle and 3.095 inch center register against your existing rotor and hub before fitting.
Key features
- Left-side directional rotor for select Baer brake systems
- One-piece full cast construction in cast iron
- Slotted surface finish on a vented disc
- Curved vane design for cooling
- Dynamically balanced for smooth running
- Performance grade with six studs on a 5.50 inch bolt circle
Signs the rotor needs replacing
Brake rotors wear with use. Pulsation through the pedal or steering wheel under braking often points to uneven thickness, while grinding or a metallic scrape can mean the pads have worn down and the friction surface is damaged. Check the rotor for deep grooves, heat spots and cracks whenever the pads are changed.
Thickness matters. A rotor worn below its minimum thickness loses heat capacity and can flex under load. Measure at several points around the friction surface and compare the readings with the minimum thickness marked on the rotor or given in a service manual. Check a new rotor against the old one before it is fitted.
- Pulsation in the pedal during braking
- Grinding or scraping noise
- Visible cracks or heat spots
- Thickness below the minimum mark
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910865 |
| UPC | 90127961209 |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Outside diameter | 14.000 inch |
| Nominal thickness | 1.150 inch |
| Center hole (register) diameter | 3.095 inch |
| Stud/lug hole quantity | 6 |
| Stud/lug hole circle diameter | 5.50 inch |
| Overall height | 2.309 |
| Surface type | Slotted |
| Solid or vented | Vented |
| Brake surface | Directional |
| Axle side | Left |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Drum in hat | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is built for select Baer brake systems and is directional, so it belongs on the left side only. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering. Because this rotor is directional, it belongs on the left side only.
Installation notes
Because the rotor is directional and specific to the left side, match the side before installation. Brake work should be carried out by a qualified technician, who can also inspect the rest of the brake system.
What’s included
One left-side 1-piece slotted replacement rotor, sold as each.
Not included: the right-side rotor, since the rotors are sold individually.
