Overview
The Baer Brakes 6929254 is a 2-piece, right-side replacement brake rotor with slotted, drilled and zinc plated friction surfaces. It measures 14.36 inch outside diameter with a 1.1 inch nominal thickness and is built from cast iron as a vented rotor for select Baer Brake systems.
The rotor has 12 bolt holes on an 8.8 inch bolt circle diameter with a stepped flange. It is directional and made for the right side only, so it is not a left-side part. Compare the bolt pattern with your hub before fitting.
Key features
- Slotted and drilled surface combined with a zinc plated finish.
- Two-piece vented cast iron construction.
- Right-side directional design.
- Curved vane design for cooling.
- Rotor stability and resistance to distortion are cited as design goals.
- Dynamic balance is listed to keep vibration low during use.
- It is a performance-grade rotor.
Drilled and slotted surfaces
Drilled and slotted rotors add holes and grooves to the friction surface. These features help release gas and debris and can help braking feel more consistent as the rotor heats up. The holes and slots also create more edges and stress points, so the rotor needs regular inspection, especially around the drilled holes where cracks tend to start.
A zinc plated coating protects the rotor from surface rust during storage and the first miles of use, but it wears away where the pads contact the rotor. Check the coating after mounting and again after the first few stops, and replace the rotor if coating loss becomes widespread. Pair the rotor with pads suited to the same heat range, and bed the pads in carefully.
- Look for cracks radiating from drilled holes
- Check the zinc finish after the first few stops
- Keep the hub and mounting face clean
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929254 |
| UPC | 844165054740 |
| Axle side | Right |
| Construction | Two piece |
| Material | Cast iron |
| Rotor type | Vented |
| Surface type | Slotted, drilled and zinc plated |
| Brake surface | Directional |
| Outside diameter | 14.36 inch |
| Nominal thickness | 1.1 inch |
| Bolt hole circle diameter | 8.8 inch |
| Bolt hole quantity | 12 |
| Hub style | Stepped flange |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
The 6929254 is presented as a replacement rotor for select Baer Brake systems, and no model years or chassis codes are given. Check the 14.36 inch diameter, the 12-hole pattern on an 8.8 inch bolt circle, and the right-side orientation against the hub you plan to use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the surface is drilled as well as slotted, inspect the zinc plated finish after mounting for any coating damage. The rotor is directional, so confirm it sits on the right side before tightening. The ABS tone ring is not included, so any existing ring must be carried over or sourced separately.
What’s included
One right-side 2-piece replacement rotor, sold individually.
Not included: ABS tone ring.
