Overview
The Baer Brakes 6801274LP is a Remaster 2-bolt GM/Ford master cylinder with a 1-1/8 inch bore and left side ports, finished in black anodizing. It is a single billet aluminum assembly that mounts on a 2-bolt GM or Ford firewall bracket.
The Remaster fits many Ford and GM applications with a 2-bolt flange. A one-piece body of 6061 T6 billet aluminum houses the bore, and six allen screws secure the billet top. Two oversized knurled caps screw on for topping up. The outlets accept inverted flare fittings with removable seats, or banjo and straight fittings, and optional proportioning valves are available separately.
Key features
- Left side outlet ports
- Fully machined 6061 T6 billet aluminum body
- 3/8-24 outlet port design for inverted flare, banjo or straight fittings
- Two machined, knurled screw-on caps
- Anodized finish with laser-etched logo
- Dual integral reservoir
Choosing outlet side
Left and right outlet versions differ only in which side the brake lines exit, so the choice depends on line routing under the hood. Before ordering, look at how your existing lines reach the master cylinder and whether the new outlet side makes a clean path. A short, supported line run usually resists flex and rubbing better.
Port side is one part of setup. Inverted flare and banjo fittings each need matching hardware, and mismatched seats can seep under pressure. Adjustable proportioning valves are sometimes added to balance front and rear braking, which changes how the circuit behaves under load, so plan that before fitting lines.
- Compare line routing before choosing the outlet side
- Match inverted flare or banjo fittings to your lines
- Secure lines with clips to prevent rubbing
- Check the booster clearance after the layout is set
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801274LP |
| UPC | 844165051220 |
| Series | ReMaster |
| Bore size | 1.125 inch (1-1/8 inch) |
| Flange type | 2 Bolt GM/Ford |
| Material | 6061 T6 Billet Aluminum |
| Finish | Black anodized body, caps and lid |
| Port exit | Left side |
| Outlet port quantity | 2 |
| Outlet port size | 3/8-24 inch |
| Outlet port fittings | Banjo w/o brass seat, 3/16 inch inverted flare and tube nuts w/ brass seat |
| Removable seats | Yes |
| Reservoir type | Dual, integral style |
| Reservoir material | 6061 T6 Billet Aluminum |
| Reservoir size | 7oz per reservoir, fill to 75 percent or 5.25oz per reservoir |
| Stroke | 1.3 |
| Master cylinder cap included | Yes |
| Brake booster included | No |
| Gasket or seal included | No |
| Mounting hardware included | No |
| Country of origin | US |
Vehicle fitment
It is a 2-bolt GM/Ford style master cylinder made for many Ford and GM applications with left side outlets.
Compare your current bore size and flange pattern against your existing master cylinder before buying. Confirm your vehicle’s year, model and trim fit before ordering.
Installation notes
Some long push-rod hydro-boost and vacuum boosters may need spacer p/n 6260258 to clear the booster push-rod. Check your booster before installation. Select inverted flare or banjo fittings to suit your brake lines, and check all fittings for leaks once the system is bled.
What’s included
One Remaster master cylinder assembly with two brass seats, two tube nuts, the master cylinder cap and an integral dual reservoir.
Not included: brake booster, mounting hardware, gasket or seal, bleeder screws, bleeder hoses, brake pressure switch, sensor and the 6260258 spacer.














