Overview
The Baer Brakes Remaster 6801298RP is a black anodized 4-bolt Mopar master cylinder with a 15/16 inch bore and right side ports. It is a dual reservoir cylinder built from billet aluminum for brake systems that mount to a 4-bolt Mopar firewall flange. No vehicle years, models or trims are named for this part, so check the fit before you rely on it.
The one-piece body is machined from 6061 T6 billet aluminum and kept small and compact. Six allen screws hold the billet top in place, and two large knurled caps screw on for filling without spillage. It is designed to work with most long and short boosters, including those with the included bullet, and with manual brake applications.
Key features
- Fully machined 6061 T6 billet aluminum body
- 4-bolt Mopar firewall mounting bracket
- Right side ports for the outlet connections
- 3/8-24 outlet ports accept inverted flare fittings with removable brass seats, banjo fittings or straight fittings
- Knurled, screw-on caps for easy filling
- Black anodized body, caps and lid
- Anodized Remasters feature laser-etched logos
Before you buy
Check the hydraulic layout before purchasing a replacement cylinder. The cylinder must match the brake lines, the booster pushrod geometry and the pedal travel of the vehicle. Looking at the existing unit’s mounting face, port spacing and outlet thread is a practical way to confirm the match before any parts are ordered.
Plan for the parts that go with the cylinder. Brass seats, tube nuts, bleeder hardware and new hoses are often needed when the fitting style changes. Having these on hand before removal keeps the brake system from sitting open for long periods.
- Compare the mounting face and port spacing with the old unit
- Keep the bleeder screw and hoses ready before starting
- Inspect brake lines for damage while the system is open
- Use fresh brake fluid when filling the new reservoir
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801298RP |
| UPC | 844165052111 |
| Series | Remaster |
| Body material | 6061 T6 billet aluminum |
| Body color | Black |
| Body finish | Anodized |
| Caps and lid finish | Anodized, black |
| Bore size | 15/16 inch (0.9375 inch) |
| Mounting flange | 4 bolt Mopar |
| Port exit | Right side |
| Outlet port size | 3/8-24 inch |
| Outlet port quantity | 2 |
| Outlet port fittings | Banjo without brass seat; 3/16 inch inverted flare with tube nuts and brass seat |
| Reservoir type | Dual, integral |
| Reservoir material | 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir; fill to 75 percent, or 5.25oz per reservoir |
| Removable seats | Yes |
| Stroke | 1.1 |
| Area | 0.69 |
| Volume ratio | 0.0840277777777778 |
| Emission code | 6 |
| Country of origin | USA |
| Box count | 1 |
Vehicle fitment
The 6801298RP is designed for many early Mopar applications and for most long and short boosters or manual brake setups. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Decide between inverted flare and banjo outlet fittings before assembly, because the included brass seats only apply to the inverted flare option. Bleeder hardware is not part of the kit, so a bleeder screw and bleeder hoses must be on hand before the system is bled. After bleeding, inspect each fitting and tube connection for seepage before road use.
What’s included
One master cylinder assembly with cap, two brass seats and two tube nuts. The dual reservoir is integral.
Not included: brake booster, bleeder screw, bleeder hoses, brake pressure switch, warning light connector, sensor, gasket or seal, and mounting hardware.













