Overview
The Baer Brakes 6801268RP is a Remaster master cylinder with a 1-1/8 inch bore, right side outlet ports and a 2-bolt GM/Ford firewall flange. It is machined from 6061 T6 billet aluminum with a polished finish on the body, lid and caps, and it is intended for Ford and GM applications with long or short boosters or manual brakes.
Stroke is listed at 1.3 and area at 0.97, and the unit has two 3/8-24 outlet ports with a dual integral reservoir. Six allen screws hold the billet top, and knurled screw-on caps make filling simpler. Inverted flare, banjo or straight fittings are all possible, and proportioning valves are optional.
Key features
- 1-1/8 inch (1.125 inch) bore with right side ports
- Fully machined 6061 T6 billet aluminum body
- Polished finish on body, lid and caps
- Two 3/8-24 outlet ports for inverted flare, banjo or straight fittings
- Removable brass seats for inverted flare outlets
- Knurled screw-on caps for spill-free filling
- Dual integral reservoir with 7oz per reservoir capacity
Caring for the polished finish
A polished billet body looks clean when new but shows fingerprints, water spots and light scratches more easily than anodized surfaces. Clean it with a mild soap solution and a soft cloth, then dry it fully so moisture does not sit in the seams around the lid and caps. Abrasive pads and harsh solvents can dull the polish, so avoid them.
Brake fluid is the main thing to keep off the finish. Wipe up any spills right away, because fluid can cloud polished metal and damage nearby paint. When working near the cylinder, cover the fender and keep a rag under the fittings. Inspect the outlet fittings and reservoir caps during routine service, and tighten them only to a snug fit, since over-tightening can distort the threads.
- Wipe brake fluid spills immediately
- Use a soft cloth and mild soap only
- Keep reservoir caps seated and clean
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801268RP |
| UPC | 844165047612 |
| Series | ReMaster |
| Bore size | 1-1/8 inch (1.125) |
| Flange type | 2-bolt GM/Ford firewall |
| Body material | 6061 T6 billet aluminum |
| Finish | Polished body, lid and caps |
| Outlet port quantity | 2 |
| Outlet port size | 3/8-24 inch |
| Outlet port exit | Right side |
| Outlet port fittings | Banjo without brass seat, 3/16 inch inverted flare and tube nuts with brass seat |
| Reservoir | Dual, integral, 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir; fill to 75 percent or 5.25oz per reservoir |
| Stroke | 1.3 |
| Area | 0.97 |
| Volume ratio | 0.0840277777777778 |
| Emission code | 6 |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
Ford and GM 2-bolt firewall mounting is the application for the 6801268RP.
Installation notes
- Some long push-rod boosters, including hydro-boost and vacuum types, may call for spacer p/n 6260258 to keep the cylinder away from the push-rod.
- Use the two included brass seats for inverted flare fittings; banjo fittings go on without them.
What’s included
One polished 1-1/8 inch master cylinder assembly with integral dual reservoir, master cylinder cap, two brass seats and two tube nuts.
Not included: the following are not supplied: booster, mounting hardware, gasket or seal, pressure switch, sensor, warning light connector, bleeder screw, bleeder hoses and spacer p/n 6260258.














