Overview
The Baer Brakes 6805201RP is a polished ReMaster master cylinder with a 7/8 inch bore and right side ports, built around a 2-bolt GM/Ford firewall flange. It is a single master cylinder with two pistons, machined from 6061 T6 billet aluminum. It is compatible with most long and short boosters, including bullet types, as well as manual brake applications.
Both outlet ports are 3/8-24 and take inverted flare lines with the included removable brass seats, or banjo or straight fittings. Use the bore size, port side and flange pattern to check the fit against your brake setup before installation.
Key features
- Machined from 6061 T6 billet aluminum
- Polished body, caps and lid
- Right side ports
- 7/8 inch bore with two pistons
- 2-bolt GM/Ford firewall mounting bracket included
- Outlets accept inverted flare, banjo or straight fittings
- Removable brass seats for the inverted flare option
- Knurled screw-on caps for filling without spillage
- Integral dual reservoir sized at 7oz per reservoir
Matching the bore to your system
Bore size sets how much fluid the master cylinder moves for each stroke of the pedal, which affects pedal feel and how the brakes respond. Pairing a bore with the wrong booster or line size can change the pedal effort, so the bore should be matched to the rest of the brake system rather than chosen on appearance alone. Polished aluminum shows wear and fluid residue more readily, so wipe the body and caps clean during routine checks.
Booster type matters just as much. Hydro-boost and vacuum units differ in how far the push rod reaches, which is why clearance is checked before the firewall bolts are tightened. Where a spacer is used, confirm that it seats squarely and that the push rod does not bind at full pedal travel. After installation, bleed the lines, check for leaks at each fitting and recheck the fluid level after the first drives.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6805201RP |
| UPC | 810215393053 |
| Series | ReMaster |
| Bore size | 7/8 inch (0.875 inch), straight bore |
| Pistons | 2 |
| Material | 6061 T6 billet aluminum |
| Finish | Polished body, caps and lid |
| Port exit | Right side |
| Outlet port size | 3/8-24 inch, 2 ports |
| Outlet fittings | 3/16 inch inverted flare and tube nuts with brass seat; banjo without brass seat |
| Reservoir | Integral, dual, 6061 T6 billet aluminum |
| Reservoir size | 7oz per reservoir; fill to 75 percent or 5.25oz per reservoir |
| Flange | 2-bolt GM/Ford, 2 mounting holes, hole diameter 0.4 |
| Pedal rod ID | 0.475 |
| Stroke | 1.1 |
| Mounting bracket included | Yes |
| Mounting hardware included | No |
| Quantity | 1, sold individually |
| Country of origin | USA |
Vehicle fitment
Make sure your vehicle’s year, model and trim match before ordering. Check the 7/8 inch bore and 2-bolt flange against your current firewall and brake setup.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Some long push-rod hydro-boost and vacuum boosters need an extra spacer, part number 6260258, so the cylinder clears the booster push rod. Confirm push-rod clearance before bolting the cylinder to the firewall. The pedal rod ID is 0.475, which helps when checking the pedal and push-rod setup. Brake booster, push rod and bleeder screws are not included, so check what your build already has.
What’s included
The package has one polished ReMaster master cylinder assembly with a mounting bracket, two brass seats and two tube nuts for the outlet fittings, plus the integral reservoir and caps.
Not included: brake booster, push rod, mounting hardware, bleeder screws, brake pressure switch and sensor.














