Overview
The Baer Brakes 6805200RP is a gray anodized ReMaster master cylinder with a 7/8 inch bore and right side ports, mounted through a 2-bolt GM/Ford firewall bracket. The gray body is paired with black anodized caps and lid, and the one-piece body is machined from 6061 T6 billet aluminum. Anodized Remasters also carry laser-etched logos.
Outlets are 3/8-24 and can be plumbed with 3/16 inch inverted flare fittings using removable brass seats, or with banjo or straight fittings. The Remaster suits most long and short boosters, including bullet boosters, and manual brake applications. Check the bore, flange and port side against your application before installation.
Key features
- Gray anodized body with black anodized caps and lid
- Laser-etched logos on anodized Remasters
- Right side ports on a 7/8 inch bore with two pistons
- 2-bolt GM/Ford firewall mounting bracket included
- Inverted flare, banjo or straight outlet fittings supported
- Knurled screw-on caps
- Integral dual reservoir
Anodized finish and care
Anodizing gives the aluminum body a harder surface than bare metal, but it can still be scratched by wire brushes, grinding or gritty rags. Brake fluid is harsh on paint and many finishes, so wipe spills away promptly with a clean cloth. Regular inspection of the caps and lid also helps, since a cracked cap lets moisture into the reservoir.
Setup matters more than appearance. Long push-rod boosters should be checked for clearance before the cylinder is bolted to the firewall, and a spacer should sit square against the mounting face. Once the cylinder is in place, bleed the lines and check each fitting for leaks. Inspect the mounting bracket and firewall bolts after the first drive, since vibration can loosen hardware on a new install.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6805200RP |
| UPC | 810215393039 |
| Series | ReMaster |
| Bore size | 7/8 inch (0.875 inch), straight bore |
| Pistons | 2 |
| Material | 6061 T6 billet aluminum |
| Body color and finish | Gray, anodized |
| Caps and lid | Black, anodized |
| Port exit | Right side |
| Outlet port size | 3/8-24 inch, 2 ports |
| Outlet fittings | 3/16 inch inverted flare and tube nuts with brass seat; banjo without brass seat |
| Reservoir | Integral, dual |
| Reservoir size | 7oz per reservoir; fill to 75 percent or 5.25oz per reservoir |
| Flange | 2-bolt GM/Ford, 2 mounting holes, hole diameter 0.4 |
| Pedal rod ID | 0.475 |
| Stroke | 1.1 |
| Mounting bracket included | Yes |
| Mounting hardware included | No |
| Quantity | 1, sold individually |
| Country of origin | USA |
Vehicle fitment
Match your vehicle’s year, model and trim to the cylinder before ordering. Compare the bore, flange and port side with your existing brake system before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Long push-rod hydro-boost and vacuum boosters can call for an additional spacer, part number 6260258, which keeps the Remaster clear of the booster push rod. Check push-rod clearance before mounting the cylinder. Booster, push rod and bleeder screws are not part of the kit.
What’s included
The package contains one gray anodized master cylinder assembly with black anodized caps and lid, two brass seats, two tube nuts, a mounting bracket and integral dual reservoir.
Not included: booster, push rod, bleeder screws, mounting hardware, and brake pressure switch or sensor.














