Overview
The Baer Brakes Big Claw HD front disc brake rotor set, part number 2261050-2, is a larger-diameter upgrade for the front axle of 2023–2026 Ford F-250 and F-350 Super Duty trucks. The product name specifies 4WD trucks with a single rear wheel. The set uses purpose-cast, conventional vented rotors with directional cooling vanes and new caliper relocation brackets that move the calipers outward.
Baer’s testing claims up to a 49 percent gain in braking effectiveness and as much as a 200-degree reduction in rotor temperatures versus OE in extreme conditions. Baer credits the added brake torque and leverage of the larger diameter, along with the curved vane design. Because wheel designs differ, Baer recommends checking clearance against your wheel with the template for this system.
Key features
- Rotors up to 2 inches larger than stock diameter on some applications, for more brake torque and leverage
- One-piece, full cast construction with curved directional vanes that move air across the rotor
- Slotted friction surface to help vent dust and gases
- New OE-style brackets keep OE pad and hardware compatibility
- Zinc-plated finish to resist rust and corrosion
- Simple bolt-on system with no brake bleeding required
Choosing a wheel for big rotors
Front brakes on a Super Duty carry a large share of the stopping work, especially when the truck is loaded or pulling a trailer down a grade. A bigger rotor adds swept area and leverage, but it also moves the working surface relative to the wheel, so clearance is the first thing to settle before any other part is chosen.
Pick pads that suit the rotor material and your typical driving, and bed the new rotors in gently so the friction surface transfers an even layer. Keep the brake fluid fresh, since heavy use raises temperatures and older fluid is more likely to fade under repeated hard stops.
- Measure wheel clearance before mounting, not after
- Replace pads at the same service as the rotors
- Flush brake fluid on the schedule your use requires
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2261050-2 |
| UPC | 90127969953 |
| Sold as | Set |
| Country of origin | USA |
| Axle | Front |
| Drive | 4WD |
| Applications | Ford F250/350 23-25 |
| Rotor type | Conventional |
| Surface type | Slotted |
| Brake surface | Directional |
| Vent type | Vented, curved vanes |
| Material | Cast iron |
| Finish | Zinc plated |
| Construction | One piece, full cast |
| Outside diameter | 15 |
| Center hole diameter | 5.084 |
| Nominal thickness | 1.496 |
| Discard thickness | 1.417 |
| Overall height | 3.94 |
| Mounting bolt hole quantity | 8 |
| Mounting bolt hole circle diameter | 6.693 |
| Mounting bolt hole diameter | 0.637 |
| Floating | Yes |
| ABS tone ring included | No |
| Grade type | Performance |
| Template | Z205U 23-25 |
| Warranty | Limited 1 Year Warranty |
Vehicle fitment
It fits 2023–2026 Ford F-250 Super Duty and 2023–2026 Ford F-350 Super Duty trucks. It is for the front axle on 4WD trucks with a single rear wheel.
The set is made for front-axle use on 2023–2026 Super Duty trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is simple and direct bolt-on, with no brake bleeding required. Check the rotor against your wheel using template Z205U 23-25 before mounting, including the spare tire wheel, because wheel styles vary and fit cannot be guaranteed in every wheel.
What’s included
A pair of rotors and a pair of new caliper relocation brackets.
Not included: Existing calipers, brake pads and pad hardware are not included. The brackets keep OE pad and hardware compatibility.






















