Overview
The Baer Brakes 55026-020 is a pair of front performance brake rotors for the 1995–1998 Chevrolet C2500. Built as one-piece, full cast, vented cast iron discs with slotted and cross-drilled friction surfaces, they are direct replacements for the factory front rotors on six-stud hubs.
The slots and drilled holes let gases and dust leave the pad-to-rotor area, which helps keep pedal feel steady and reduces brake fade. The zinc-plated finish suits open-center wheels, and the rotor carries a 140 bolt hole circle diameter. This set matches the 1995–1998 Chevrolet C2500 with a cross-drilled and slotted front face.
Key features
- Slotted and cross-drilled friction surface for venting gases and dust
- Vane structure that Baer calls enhanced for cooling and durability
- Premium grade with mill balanced construction
- Zinc-plated finish for open-center wheels
- Chamfered cross-drilled holes, intended to help limit stress cracking
- ABS tone ring included
Choosing and inspecting rotors
Rotors wear through friction, so the braking surface gradually thins and can develop grooves, hot spots or a pulsing pedal. Before replacing them, measure runout and thickness against the minimum thickness stamped on the rotor hat or given in the service manual for the vehicle. Pads are usually replaced at the same time, since worn pads can score a new rotor quickly.
Cross-drilled and slotted faces trade some pad life for better gas and dust release, so they suit drivers who brake hard or tow. Bed in new pads and rotors with a series of moderate stops before normal use, and keep brake fluid fresh because heat travels from the rotor into the hub and caliper. Inspect the rotor face for cracks or heavy scoring at every pad change.
- Check the hub face and studs for rust before mounting
- Torque lug nuts in a star pattern to the vehicle’s specified value
- Replace pads whenever rotors are replaced for even contact
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 55026-020 |
| UPC | 844165002123 |
| Axle | Front |
| Rotor type | Vented, one-piece, full cast |
| Material | Cast iron |
| Surface type | Slotted and cross-drilled |
| Brake surface | Directional |
| Disc finish | Zinc plated |
| Stud/lug hole quantity | 6 |
| Mounting bolt hole circle diameter | 140 |
| Outside diameter | 294.89 |
| Overall height | 114.6 |
| Discard thickness | 31 |
| ABS tone ring included | Yes |
| Emission code | 6 |
| Grade type | Premium |
| Country of origin | CN |
Vehicle fitment
The manufacturer fitment list names only one front-rotor application:
- 1995–1998 Chevrolet C2500
It fits the 1995–1998 Chevrolet C2500 with 4-wheel ABS and a 7200 (lb) gross vehicle weight rating. The GMC C2500, Chevrolet Express 2500 and GMC Savana 2500 are not confirmed fits for this part. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
This set specifies six studs on a 140 bolt hole circle diameter, so check your hub against these figures before fitting. An ABS tone ring is included, so confirm it is supplied with your rotors when you open the box. Brakes are safety-critical, so have the work checked by a qualified technician if you are unsure.
What’s included
A pair of front rotors sold as a set, with ABS tone ring included.
Not included: Brake pads and caliper hardware are not included.
