Overview
The Baer Brakes 6921223 is a right-side, 1-piece replacement brake rotor with a plain surface finish, sold individually. It measures 12.000 inch in outside diameter and 1.020 inch in nominal thickness, is vented, and has a 5 x 5.00 inch lug pattern. It is made for select Baer Brake systems and is directional, so it is built for the right side of the vehicle only.
The full cast iron body uses a curved vane design for cooling, and each rotor is dynamically balanced for vibration-free running. The design resists distortion and keeps the rotor stable. Confirm fit for your vehicle before ordering.
Key features
- Plain surface finish with no slots or drilled holes
- Curved vane design that Baer says is meant for optimum cooling
- Directional rotor built for the right side only
- Full cast, one-piece construction in performance-grade cast iron
- Dynamic balanced for vibration-free performance
- Drum-in-hat design
Before you buy
Brake rotors wear down over time. Common signs include a pulsing pedal, grooves or scoring on the friction face, and a noticeable lip at the outer edge. When the rotor is replaced, the pads are usually replaced at the same time so the new surface beds in evenly. Check the hub face and wheel studs for damage before mounting, and clean any rust or corrosion from the center register so the rotor sits flat.
A plain friction surface depends on the pads for bite and cleaning, so pad compound matters more here than on a slotted rotor. Choose pads suited to the same duty as the rotor. Bed in new pads and rotors gradually with a series of moderate stops before normal driving, and recheck lug torque after the first few drives.
- Replace pads and hardware along with the rotor
- Measure runout with a dial indicator before fitting
- Inspect the hub register for rust and debris
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6921223 |
| UPC | 90127962190 |
| Sold as | Each |
| Country of origin | USA |
| Axle side | Right |
| Rotor type | Vented, 1-piece full cast |
| Outside diameter | 12.000 inch |
| Nominal thickness | 1.020 inch |
| Overall height | 2.4 inch |
| Center hole diameter | 3.055 inch |
| Stud/lug hole circle diameter | 5.00 inch |
| Stud/lug hole quantity | 5 |
| Surface type | Plain |
| Brake surface | Directional |
| Material | Cast iron |
| Grade type | Performance |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Emission code | 6 |
Vehicle fitment
Fitment is for select Baer Brake systems. Before fitting, check the axle side, 5 x 5.00 inch bolt pattern, 3.055 inch center hole and 12.000 inch diameter against your brake system and your vehicle’s year, model and trim.
A left-side Baer rotor is not a substitute for this right-side part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional and side-specific, so match it to the correct hub side before fitting it. Its 3.055 inch center hole has to sit on the hub register, and the 5 x 5.00 inch lug pattern must line up with the wheel studs. Work only on a supported vehicle and follow the brake system procedure for the rest of the job.
What’s included
One right-side replacement rotor, sold individually.
Not included: ABS tone ring; this rotor does not include one.
