Overview
The Baer Brakes 6801161 is a front caliper rebuild kit for Baer 6S, 6R and Xtr brake calipers. It services one caliper and supplies the O-rings, pressure and weather seals, crush washers and anti-rattle clip needed to rebuild that caliper, with piston sizes of 1.625 inch, 1.375 inch and 1.1875 inch.
The kit fits Baer 6S, 6R and Xtr front calipers. Because the caliper type, not a vehicle model, determines what the kit fits, identify which Baer caliper you have before starting. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Services one caliper
- EPDM rubber pressure and weather seals
- Square-rim O-rings with inside diameters of 1.1875, 1.625 and 1.375
- Stainless steel brake pad anti-rattle clip
- Crush washers and a bleeder screw dust cap
- Covers 6S, 6R and Xtr caliper types
Before you rebuild
A caliper rebuild replaces the seals and small hardware that keep brake fluid inside the caliper and allow the pistons to move smoothly. Worn seals can let fluid seep past the piston, reduce pedal feel and cause uneven pad wear, so the work is usually done when a caliper starts leaking or sticking.
Before disassembly, clean the outside of the caliper and note how the parts come apart. Inspect the piston bore and piston surface for scoring, pitting or corrosion. Seals seat against these surfaces, so a damaged bore can leak even when the new kit is fitted correctly. Replace any part that cannot be cleaned to a smooth finish.
After reassembly, bleed the brake system with fresh fluid and check every seal and fitting for leaks before driving. Keep the bleeder dust cap in place when the bleeder is not in use to limit dirt and moisture entering the threads.
- Clean the caliper and bench-check the bore before fitting seals
- Lubricate seals with the fluid type recommended for your brake system
- Re-check brake pad clearance and pedal feel after the first stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801161 |
| UPC | 90127959497 |
| Caliper types | 6R, Xtr, 6S |
| Calipers serviced per kit | 1 |
| Piston sizes | 1.625 inch, 1.375 inch and 1.1875 inch |
| O-ring inside diameter | 1.1875, 1.625 and 1.375 (inch) |
| O-ring material | EPDM rubber |
| O-ring rim shape | Square |
| Seal type | O-ring |
| Pressure seals | Included |
| Weather seals | Included |
| Pad anti-rattle clip | Included, stainless steel |
| Crush washers and dust cap | Included |
| Bleeder screw dust cap | Included |
| Bleeder screw | Not included |
| Pad abutments | Not included, sold separately |
| Emission code | 6 |
| Sold as | Kit |
| Country of origin | USA |
Vehicle fitment
Fitment follows the Baer caliper type, and the kit covers 6S, 6R and Xtr calipers. Identify your caliper type and confirm fit for your vehicle’s year, model and trim before ordering.
This kit does not cover calipers outside the 6S, 6R and Xtr types named here. Confirm your caliper type and piston sizes before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bleeder screw is not included, and the bleeder cap in the kit is a dust cap for the bleeder screw. Pad abutments are sold separately, so plan for them if your brake setup uses them. Caliper rebuilds involve hydraulic brake components, so work on a clean bench and check for leaks before driving.
What’s included
The kit services one caliper and includes O-rings for 1.625 inch, 1.375 inch and 1.1875 inch pistons, EPDM pressure and weather seals, a stainless steel brake pad anti-rattle clip, crush washers, and a bleeder cap.
Not included: Pad abutments are sold separately, and the bleeder screw is not part of the kit.












