Overview
The Power Stop S5300 (part number PSTS5300) is a powder-coated rear brake caliper with bracket for the 2011–2020 Dodge Durango and the Jeep Grand Cherokee from 2011 to 2020, including the WK generation.
This Performance caliper is made for drivers who want better looks and a bolt-in swap. Power Stop remanufactures the caliper and bracket in its Chicago, IL facility, applies a high-temperature red powder coat, and fits all-new boots and seals so the unit goes on in place of the stock rear caliper.
Key features
- Rear caliper with matching bracket, direct fit
- Remanufactured at Power Stop’s Chicago, IL facility
- Red powder coat rated for high temperature
- Fresh premium boots and seals throughout
- Caliper pins treated with high-temperature silicone lubricant
- Premium abutment clips supplied where applicable
Rear caliper service
A rear caliper with its bracket is a sealed hydraulic unit that works with the parking brake mechanism on many trucks and SUVs. Check the bracket bolts, slide pins and mounting surfaces for wear before fitting the new unit. Parking brake function should be tested after the job, since a misadjusted cable or actuator can make the vehicle roll.
Pads and rotors should be replaced when they are worn, because a new caliper cannot correct uneven pad contact. Measure rotor thickness and check the faces for scoring. Brake fluid should be fresh, and the system should be bled until the pedal feels firm before the vehicle is driven.
- Check the parking brake after installation
- Inspect bracket bolts and mounting surfaces
- Replace pads and check rotors at the same time
- Bleed the brakes until the pedal is firm
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTS5300 |
| Product type | Rear brake caliper with bracket |
| Position | Rear |
| Fit type | Direct fit |
| Finish | High-temperature red powder coat |
| Condition | Remanufactured, with new boots and seals |
| Pin lubricant | High-temperature silicone |
| Abutment clips | Premium clips, included where applicable |
Vehicle fitment
It fits the 2011–2020 Dodge Durango, the 2011–2017 Jeep Grand Cherokee (WK) and the 2018–2020 Jeep Grand Cherokee. Grand Cherokee trims run from Laredo and Limited to Overland, Summit and Trailhawk, and Durango trims run from SXT and GT to R/T and Citadel.
Earlier Jeep Grand Cherokee generations, such as the ZJ and WJ, are not on the list, and neither are Grand Cherokee models from 2021 on. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the calipers replace the stock units, the brake hydraulics must be bled once the lines are reconnected.
What’s included
A rear caliper and bracket with new boots and seals, silicone lubricant on the pins, and premium abutment clips where applicable.










