Select your vehicle

American Trail Products 4.0 Renegade/Compass Lift – 35150002

American Trail Products

Shop Jeep Renegade Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 4-inch coil spring suspension lift for Jeep Renegade and Compass
  • Billet T6 aluminum strut spacers bolt to the factory struts
  • Lift range 4 to 5.5 inches, depending on starting height
  • Part number A/T35150002

Description

Overview

The 35150002 is a 4-inch suspension lift for the 2015–2020 Jeep Renegade and the 2017–2020 Jeep Compass. It uses billet T6 aluminum strut spacers and rear coil springs, and it is designed to preserve factory ride and stability.

The kit is designed to raise the Renegade or Compass 4.0 inches, and the actual lift ranges from 4 to 5.5 inches depending on how high the vehicle sat before. It covers Renegade and Compass models including the 4WD Sport, Latitude, Limited and Trailhawk.

Key features

  • 4-inch suspension lift
  • Billet T6 aluminum strut spacers
  • Designed to bolt directly to the factory strut
  • Coil springs designed for the lift
  • The design is intended to keep the factory ride feel and stability.

Strut work and alignment

Installing the coil springs means the struts come apart, which is the most involved part of this lift. The spacers bolt to the factory strut, but the spring compression step needs care and proper tools. Take time with the strut assembly, and make sure the spring seats are clean and the hardware is correctly set before reassembly.

A lift this size changes suspension geometry, so alignment should be checked once the work is complete. Expect the front and rear geometry to shift slightly from factory. Look at tire wear after the first few hundred miles, and recheck the alignment if the vehicle pulls or the steering feels different.

  • Keep spring compressors in place until the strut nut is secure
  • Inspect the strut mounts for wear during the install
  • Check brake lines and wiring for stretch after the lift

Specifications

Brand American Trail Products
Part number A/T35150002
Type Suspension lift kit
Lift height 4 inches
Lift height range 4 to 5.5 inches
Strut spacer material T6 billet aluminum
Rear lift component Coil spring
Front shocks Not included
Rear shocks Not included
Fitment type Direct fit

Vehicle fitment

It fits the 2017–2020 Jeep Compass in Altitude, High Altitude, Latitude, Limited, Sport, Trailhawk and Upland trims, and the 2015–2020 Jeep Renegade in 75th Anniversary, Altitude, Dawn of Justice, High Altitude, Latitude, Limited, Sport, Trailhawk and Upland trims. Check the year, model and trim against your vehicle before ordering.

The list does not cover the Compass from 2007 to 2016 or the 2021 model year and later. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The strut spacers bolt directly to the factory strut, but the struts must be disassembled to install the new coil springs. Plan for the strut work before starting the lift, and have the alignment checked afterward, because a lift this size changes the suspension geometry.

What’s included

Strut spacers and the rear coil springs are the lift components.

SKU: A/T35150002 Categories: ,

Fitment

VehicleYearsTrims
Jeep Compass2017–2020Altitude, High Altitude, Latitude, Limited, Sport, Trailhawk, Upland
Jeep Renegade2015–202075th Anniversary, Altitude, Dawn Of Justice, High Altitude, Latitude, Limited, Sport, Trailhawk, Upland

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the 35150002 need the struts taken apart?

Yes. The strut spacers bolt to the factory strut, but the struts must be disassembled to install the new coil springs. Plan for that work before starting the lift.

How much lift does this kit give?

The kit is rated at 4 inches, with a lift range of 4 to 5.5 inches. The final height depends on how high the vehicle sat before the lift was installed.

Does it fit a 2019 Jeep Renegade Limited?

Yes. It fits the 2015–2020 Jeep Renegade, including the Limited trim, which covers 2019. Compass models from 2017 to 2020 are also covered.

Does the lift affect brake lines or driveline angles?

Raising the vehicle can stretch brake lines and change driveline angles, so check these after installation and again after the first few drives. Look for rubbing, pinching or fluid leaks, and address any contact before normal use.

When should the strut spacers be inspected?

Inspect the spacers and their bolts at each oil change or service visit. Look for loose hardware, cracks in the aluminum, and signs of leaking from the strut. Tighten or replace parts as needed and recheck alignment after any strut work.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Renegade Lift Kits on Amazon