Overview
The Pro Comp K4190B is a 6-inch Stage 1 lift kit with an ES9000 rear shock for the 2015–2018 Ford F-150. The front uses a strut spacer, extended steering knuckles and one-piece crossmembers, and the rear is lifted with blocks fitted with bump stop pads.
The integrated front differential skid plate is part of the front package, and the factory ball joints stay in place. The kit is compatible with roll stability control, so the lift does not require the factory system to be disabled.
Key features
- 6-inch lift height from a Stage 1 kit
- Front strut spacer
- Extended steering knuckles
- One-piece crossmembers
- Integrated front differential skid plate
- Rear blocks with bump stop pads
Ball joints and steering
Ball joints carry the weight and articulation of the steering knuckle, so their condition matters more once the knuckle geometry changes. Pulling the knuckle to inspect the joints is a sensible step during a lift, since a loose or dry joint is much easier to address before the new parts are fitted. Tie rod ends and the steering drag link should be checked at the same time, because they work together with the knuckle to keep the wheels tracking straight.
After the install, pay attention to steering response at highway speed and any vibration that changes with wheel speed. Extended knuckles can change steering effort slightly, so a short test drive in a clear area is useful before heavier driving. Keep an eye on the boots and grease fittings on the steering joints as part of routine service.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4190B |
| UPC | 700007161401 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 1 |
| Suspension type | Knuckle |
| Front lift | Strut spacer, extended steering knuckles and crossmembers |
| Rear lift | Lift blocks with bump stop pads |
| Rear shock | ES9000 |
| Front shocks | Re-use OEM |
Vehicle fitment
Fitment covers the 2015–2018 Ford F-150 King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL and XLT trims.
The list covers the 2015 through 2018 model years only. Earlier and later F-150 generations are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Extended knuckles and new crossmembers change the front geometry, so have the alignment and the driveline angles checked after the kit is installed.
What’s included
The kit includes the front strut spacer, extended steering knuckles, one-piece crossmembers, the integrated differential skid plate, rear blocks with bump stop pads, and the ES9000 rear shock. The front shocks are re-used OEM.






























