Overview
The Fabtech K2231DL is a 6 inch radius arm system with front Dirt Logic 4.0 resi coilovers and rear Dirt Logic 2.25 shocks. The radius arms are patent pending and have a fully tubular structure, and the system adds an adjustable alignment cam that allows caster adjustment.
The arms use a fully tubular structure. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- 6 inch lift
- Front Dirt Logic 4.0 resi coilovers
- Rear Dirt Logic 2.25 shocks
- Patent pending radius arms with a fully tubular structure
- Dimple die side plates
- Adjustable alignment cam that allows caster adjustment
Radius arms and axle location
Radius arms link the axle to the frame and control how it moves under acceleration, braking and wheel travel. When the ride height changes, the arms set a new axle position, which also changes pinion angle and caster. A correctly located axle lets the drivetrain keep working smoothly through suspension articulation on the trail.
Before choosing a system, look at the rest of the front end. Steering components, brake lines and driveshaft angles may need inspection once the height is changed. Bushings at the frame and axle ends wear over time, so look for play, cracking and torn boots at regular service intervals.
Radius arm installs are usually paired with a fresh alignment and a driveline check. Keeping the alignment results with the vehicle records gives later service a clear reference point for caster and toe. Owners who drive mostly on pavement and owners who run rough trails often set caster differently, so the setting should match how the vehicle is used.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2231DL |
| UPC | 700008131361 |
| Lift | 6 inches |
| Front shocks | Dirt Logic 4.0 resi coilovers |
| Rear shocks | Dirt Logic 2.25 |
| Radius arm | Patent pending, fully tubular |
| Caster | Adjustable by alignment cam |
Vehicle fitment
Fit should be checked against your vehicle’s year, model and trim before ordering.
Installation notes
A radius arm system changes the axle location and the caster, so an alignment is needed after installation. Use the alignment cam to set caster, and check the driveline angles at the new height.
What’s included
The kit includes the radius arm system with the front coilovers and rear shocks. Review the package contents against your installation plan before starting.









