Overview
The Pro Comp 6-inch Lift Kit with PRO-M Shocks, part number EXPK5089M (kit K5089M), is a stage 1 suspension lift for 2016 to 2023 Toyota Tacoma trucks. It fits the Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and Trail versions.
The system is designed for the 2016 Tacoma with both on-road and off-road use in mind. Extended steering knuckles keep the rack and pinion in the factory location, which keeps steering geometry intact. Rock-proof crossmembers add durability, and the design maintains suspension angles while allowing full compression and extension without binding ball joints.
The specifications list a 6-inch stage 1 lift with a lift height range of 6 to 7 inches. Rear lift comes from a block or spacer paired with a block and U-bolt component. PRO-M shocks are listed at the front and the rear, and they are included.
Key features
- 6-inch stage 1 suspension lift
- Extended steering knuckles that keep the rack and pinion in the factory location
- Rock-proof crossmembers
- PRO-M shocks at the front and rear, included
- Lift height range of 6 to 7 inches
Steering and ball joint care
Extended steering knuckles change the geometry at the front, so the steering and ball joints carry the new angles for the life of the kit. Worn ball joints can cause wandering, pull or a loose feeling at speed, and they wear faster when the suspension works through a larger range. Check them during any alignment or tire rotation.
Rock-proof crossmembers protect the lower front of the truck, and their mounting bolts can loosen after rough trail use. Inspect the front differential, skid plate fasteners and mounts after off-road trips. Owners who use the truck on rough ground often find the underside is where wear starts.
- Check ball joints at every alignment
- Inspect crossmember bolts after trail use
- Look for leaks around the differential
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK5089M |
| Kit code | K5089M |
| Suspension type | Lift kit, stage 1 |
| Lift height | 6 inches stage 1; range 6 to 7 inches |
| Rear lift method | Block or spacer |
| Rear lift component | Block and U-bolt |
| Shocks included | Yes |
| Front shocks | PRO-M |
| Rear shocks | PRO-M |
| Fit type | Direct fit |
Vehicle fitment
It is a direct fit for the 2016 to 2023 Toyota Tacoma in the Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and Trail versions.
The list does not include the 2015 and earlier Tacoma or the 2023 and newer models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit uses extended steering knuckles, the alignment should be checked after installation, and the ride height at all four corners should be measured.
What’s included
The 6-inch stage 1 lift kit with PRO-M front and rear shocks, and the rear block and U-bolt components.













