Overview
The Pro Comp 5.5-inch Stage I Lift Kit with ES9000 Twin Tube Shocks, part number EXPK1097B (kit K1097B), is a stage 1 suspension lift for the 2020 and 2021 Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD. It fits the Silverado Custom, High Country, LT, LTZ and WT versions, and the Sierra AT4, Base, Denali, SLE and SLT versions.
The kit is a complete bolt-on system with precision-engineered knuckles, one-piece crossmembers and gas-charged shocks. Installation requires no drilling or welding, and the kit is designed to clear tires up to 37 inches tall while staying compatible with the StabiliTrak electronic stability control system.
The specifications list a 5.5-inch stage 1 lift, with a lift height range of 4 to 5.5 inches and 37 inches as the tire size. The rear uses a block or spacer with a block and U-bolt component. ES9000 shocks are listed at the front and the rear, and shocks are included with the kit.
Key features
- 5.5-inch stage 1 suspension lift
- ES9000 gas-charged shocks at the front and rear, included
- Precision-engineered knuckles and one-piece crossmembers
- Clears tires up to 37 inches tall
- Compatible with StabiliTrak stability control
Alignment after a big lift
A 5.5-inch stage 1 lift changes the geometry of the front and rear suspension more than a smaller kit would. Steering angles, caster and driveline angles all shift as the truck sits higher, so an alignment check after the first week of driving is a practical habit.
Tires that fill the clearance can still rub at full steering lock or during compression on rough roads. Test the turn on a level surface, and check the inner fender and the brake hoses for contact after the first few trips. A slight trim or a spacer may be needed for some wheel offsets.
Gas-charged shocks and the one-piece crossmembers carry much of the new load, so check their mounting bolts periodically. Stability control systems are sensitive to uneven tire sizes, so keep all four tires matched and inflated to the same pressure.
- Schedule an alignment after the first week
- Test full-lock turns for rubbing
- Check shock and crossmember bolts for torque
- Keep all four tires matched in size and pressure
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK1097B |
| Kit code | K1097B |
| Suspension type | Lift kit, stage 1 |
| Lift height | 5.5 inches stage 1; range 4 to 5.5 inches |
| Tire size | 37 inches |
| Rear lift method | Block or spacer |
| Rear lift component | Block and U-bolt |
| Shocks included | Yes |
| Front shocks | ES9000 |
| Rear shocks | ES9000 |
| Fit type | Direct fit |
Vehicle fitment
The kit is a direct fit for 2020 to 2021 Silverado 2500 HD trucks in the Custom, High Country, LT, LTZ and WT versions, and for 2020 to 2021 Sierra 2500 HD trucks in the AT4, Base, Denali, SLE and SLT versions.
The list does not include the 2019 and earlier or 2022 and newer 2500 HD models, or any 1500 models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit requires no drilling or welding. Check the alignment and driveline angles after installation, since the ride height changes.
What’s included
The 5.5-inch stage 1 lift kit with ES9000 front and rear shocks, the precision-engineered knuckles, and the one-piece crossmembers.


























