Overview
The Rubicon Express JL7100 is a 2.5-inch Super-Ride lift kit for the 2018-current Jeep Wrangler JL, offered for both 2-door and 4-door models. It uses 1.75-inch diameter 4130 chromoly Super-Ride front lower arms, extended sway bar end links and extended bump stops. The coil springs are tuned for bump compliance and load handling. The kit is listed without shocks.
The system provides the height to clear 35-inch tires on a loaded non-Rubicon model and 37-inch tires on Rubicon models. Its lift range runs from 2.5 to 3 inches for this version. It covers 2018-current Wrangler JL 2-door and 4-door models. Shocks are not included with this kit, so the shock setup for the new height needs to be planned.
Key features
- 2.5-inch lift height
- 1.75-inch diameter 4130 chromoly Super-Ride front lower arms
- Coil springs with rates tuned for bump compliance and load handling
- Extended sway bar end links
- Extended bump stops
- Designed for both 2-door and 4-door JL models
Choosing shocks for a 2.5-inch height
Because shocks are not part of this kit, the choice of shocks is an important part of the install. A shock that was matched to the factory height may run near its limit at a higher ride height. Look for a shock with the correct length and valving for a 2.5-inch lift and for how the vehicle will be driven.
Coil springs tuned for bump compliance and load handling change how the suspension rides, so the shocks should match that spring rate. Off-road use and loaded driving both put more demand on the damping. Planning the shock purchase before the install avoids a mismatch later.
- Confirm shock length for the new ride height
- Match damping to the coil spring rate and typical load
- Replace shocks in pairs for even handling
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JL7100 |
| UPC | 700008525851 |
| Suspension type | Super-Ride short arm |
| Lift height | 2.5 inches (chart range 2.5 to 3 inches) |
| Front lower arms | 1.75-inch diameter 4130 chromoly |
| Spring type | Coil spring kit |
| Shocks | Not included |
Vehicle fitment
Based on the product title and description, this kit covers 2018-current Wrangler JL 2-door and 4-door models, which places it on the 2018-2026 Jeep Wrangler (JL).
Confirm your vehicle’s year, model and trim before ordering. Shocks are not included, so confirm your shock setup for the new height.
Installation notes
The Super-Ride front lower arms and the coil springs change the front ride height and geometry, so the alignment should be checked after installation. The extended sway bar links and bump stops are part of the same job.
What’s included
The kit includes the Super-Ride front lower arms, coil springs, extended sway bar end links and extended bump stops.
Not included: shock absorbers.










