Overview
The Rancho 4-inch Lift Kit, part number RS66402B, is a front and rear suspension upgrade for 4WD Ram 1500 trucks. It fits 2013 to 2018 Ram 1500 models, and Eco-Diesel engine models are also covered.
The kit includes a fully boxed welded subframe for strength and ductile iron extended steering knuckles. Inner and outer tie rods, brake lines, sway bar extensions and all necessary hardware are included.
The kit includes a fully boxed welded subframe for added strength and ductile iron extended steering knuckles. Inner and outer tie rods, brake lines, sway bar extensions and all the necessary hardware are included.
The rear uses extended length coil springs, and the kit’s installation hardware is included. Separate RS5000X extended travel front and rear shocks are needed for a complete installation.
Key features
- 4-inch lift
- Fully boxed welded subframe
- Ductile iron extended steering knuckles
- Inner and outer tie rods
- Brake lines and sway bar extensions
- Rear extended length coil springs
Matching shocks and steering parts
A lift this size changes the angles at which the shocks work, so the shock length and mounting points have to match the new ride height. Extended travel shocks are the usual choice for this type of front and rear lift because they keep the shock working through the full suspension range. Pairing the shocks with the steering parts in the kit keeps the front geometry consistent from the knuckles to the wheels.
Tie rods and steering knuckles wear faster on lifted trucks that see rough trails, so inspect the tie rod ends and ball joints after the first few trail runs. Look for play when the wheel is rocked, torn boots, and uneven tire wear across the tread. Brake lines and sway bar extensions should be checked at the same time for kinks or stretched fittings.
- Check shock mounting hardware after the first trail runs
- Inspect tie rod ends for play
- Look for torn boots on the knuckles
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS66402B |
| UPC | 39703008785 |
| Lift height | 4 inches |
| Position | Front and rear |
| Drivetrain | 4WD |
| Subframe | Fully boxed, welded |
| Knuckles | Ductile iron, extended length |
Vehicle fitment
It fits 2013 to 2018 Ram 1500 models.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit needs RS5000X extended travel front shocks and RS5000X rear shocks, which are separate from the kit, so plan the shock set before the install.
What’s included
Fully boxed welded subframe, extended steering knuckles, inner and outer tie rods, brake lines, sway bar extensions, a pair of rear extended length coil springs and all required hardware. Not included: RS5000X front and rear shocks.














