Overview
The Skyjacker 3 Inch Performance Strut Lift Kit with Rear Black Max Shocks, part number TU730STBB, is a 3 inch lift kit for the Toyota Tundra. It fits the 2007–2019 Tundra in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims.
The kit uses performance shocks at the front and Black MAX shocks at the rear. The rear is lifted with a block and spacer, and the lift height range is 0 to 3.5 inches. Shocks are included.
The kit is built around a performance strut at the front, so the front ride depends on the new strut rather than the factory part. The rear uses a block and spacer, which is a simpler rear lift than a coil or leaf change. Check the front and rear height after fitting, and confirm that the shocks suit how you drive.
Key features
- 3 inch performance strut lift
- Black MAX rear shocks
- Performance front shocks
- Rear block and spacer lift
- Shocks included
Strut and shock balance
A strut is part of the suspension structure as well as a damper, so replacing it changes how the front end carries load and steers. Pairing a performance strut with a rear block lift can leave the front and rear heights slightly different, which affects handling. Check both ends for even height after fitting, and recheck the strut top and mount bolts after the first drives.
Rear shocks work together with the spring and block arrangement, so keep the setup consistent once it is set. Shock wear shows up as bouncing, fluid leaks or uneven tire wear. Inspect the strut and shock bodies periodically, and replace worn bushings and mounts along with the shocks.
- Check front and rear height after fitting
- Recheck strut top and mount bolts
- Inspect shock bodies for leaks
- Replace worn bushings with the shocks
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | TU730STBB |
| Suspension type | Lift kit (performance strut) |
| Lift | 3 inch |
| Lift height range | 0 to 3.5 inches |
| Rear lift method | Block and spacer |
| Front shocks | Performance shocks |
| Rear shocks | Black MAX |
| Shocks included | Yes |
Vehicle fitment
It fits the 2007–2019 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims.
Tundra years outside 2007–2019 and other Toyota models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear lift is a block and spacer, and the front uses the performance strut. Check the block against your rear axle position before fitting.









