Overview
The Pro Comp K2101BPS is a 6-inch lift kit for the Ram 1500 with 4WD and Eco diesel engines. It suits 2014–2018 Ram 1500 models in Big Horn, Express, HFE, Laramie, Limited, Rebel, SLT, ST, Sport and Tradesman trims.
The front shock on this version is the Pro Runner SS coilover strut rather than the ES9000 shock used on the K2101B, so the front shock setup differs between the two. This version uses Pro Runner SS coilover struts at the front and Pro Runner shock absorbers at the rear. The rest of the system includes crossmembers, steering knuckles, a skid plate and drop brackets for the differential, control arms and track bar.
Key features
- 6-inch lift kit with a listed lift height range of 5 to 6.99 inches
- Front Pro Runner SS coilover struts
- Rear Pro Runner shock absorbers
- Crossmembers and steering knuckles
- Driveshaft spacer and wiring harness
- Skid plate included
Coilover strut clearance
Coilover struts combine the spring and damper into one unit, so the front end feels different from a coil and shock setup. Their body length and mounting points can sit closer to the brake hose, steering arm or inner fender than stock parts did. Check the path of the brake lines and steering components through the full range of travel before the wheels go on, and make sure the strut body can move freely.
Front end parts are best inspected as a group. Ball joints, tie rod ends and the steering damper take more load after a lift, so look at them during the first few weeks of driving. Once the alignment is set, recheck strut mounts and brake hose routing, since new components can settle as they seat.
- Look for brake hose contact at full lock
- Inspect strut mounts for cracks
- Recheck alignment after the first week
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2101BPS |
| UPC | 70000702757 |
| Lift | 6 inches |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Knuckle |
| Front shocks | Pro Runner SS |
| Rear shocks | Pro Runner |
| Rear lift method | Spacers |
| Max tire size | 35×12.50R17-20, 315/70R17, 305/70R18, 325/65R18, 295/60R20 |
| Wheel size | 18×9 with 5″ backspacing, or 20×9 with 5″ backspacing |
Vehicle fitment
It is designed for 2014–2018 Ram 1500 trucks in the trims named above, one model year beyond the K2101B and K2101BP.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Coilover struts change the front shock mounting, so verify that the new struts clear the brake lines and steering components during the fit. An alignment is required after the knuckles and crossmembers are installed, and the ride height should be checked on both sides once the alignment is done.
What’s included
The kit includes Pro Runner SS front coilover struts, rear Pro Runner shock absorbers, crossmembers, differential drop brackets, steering knuckles, a driveshaft spacer, a wiring harness, front brake lines, a compression strut and mount, a skid plate, rear control arm drop brackets, rear sway bar end links, rear coil spring spacers, and hardware.









