Overview
The Pro Comp K2102B is a 4-inch stage 1 bracket and knuckle lift kit for 4WD Ram 1500 trucks. It suits 2012–2018 Ram 1500 trucks in Big Horn, Express, Laramie, Rebel, SLT, Sport and Tradesman trims.
The kit covers the front with crossmembers, steering knuckles, differential drop brackets and a driveshaft spacer. It lifts the rear with coil spring spacers and includes the ES9000 rear shocks. No front shock is supplied with this kit.
Key features
- 4-inch stage 1 lift, 3 to 4.99 inch lift height range
- Steering knuckles and crossmembers
- Front differential drop brackets and driveshaft spacer
- Front strut spacer and sway bar end link extensions
- Rear ES9000 shocks and rear track bar bracket
- Skid plate and control arm drop brackets
Choosing a front shock
This kit supplies no front shock, so front damping is a separate decision. The bracket and knuckle design changes the upper and lower mounting points, so a new shock must match the bracket layout and the length needed at the raised height. Measure the installed length before ordering and confirm the mounts suit the knuckle style.
The ES9000 rear shocks are included, and a mismatch between front and rear damping can make the truck feel unsettled at speed. Many owners choose front shocks with a damping feel similar to the rear unit. Inspect front and rear mounts together at each oil change, and check that the track bar bracket clears the new rear axle position.
- Measure installed length before ordering
- Match front and rear damping feel
- Check track bar clearance at the rear axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2102B |
| UPC | 700007251171 |
| Lift | 4 inches, stage 1 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Bracket and knuckle |
| Front shocks | None included |
| Rear shocks | ES9000 |
| Rear lift method | Spacers |
| Drive | 4WD models only |
Vehicle fitment
It is designed for 2012–2018 Ram 1500 trucks, including Big Horn, Express, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Rebel, SLT, ST, Special Service, Sport and Tradesman. It is for 4WD trucks only.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the knuckles and brackets replace the stock front parts, the steering and brake lines should be checked during the fit, and an alignment should follow. The rear track bar bracket is included for the raised rear axle.
What’s included
The kit includes crossmembers, steering knuckles, front differential drop brackets, a driveshaft spacer, sway bar end link extensions, a skid plate, control arm drop brackets, coil spring spacers, a front strut spacer, a rear track bar bracket, rear ES9000 shocks, a rear brake line drop bracket and hardware.









