Winch sizing explained: GVWR x 1.5, first-layer line pull, synthetic vs steel rope, fairleads, mounts, battery needs, snatch blocks and D-ring WLL ratings.
Winch Mounting Plate
Showing 25–36 of 40 resultsSorted by popularity
-
Winch Mounting Plate
One Piece Winch Mount
- Fab Fours grill guard winch mount FS17-N4170-1 in black powder coat
- Fits 2017–2018 Ford F-250 and F-350 Super Duty in King Ranch, Lariat, Limited, Platinum, XL and XLT trims
- Integrated grill guard on a one-piece, fully welded design
- Holds winches of 12,000 lb or smaller
- Slips through factory tow hook slots to the frame, with provided brackets
SKU: FFIFS17-N4170-1 -
Winch Mounting Plate
Fab Fours One piece Winch Mount (Black) – FS17-N4160-1
- Fab Fours winch mount FS17-N4160-1 in black powder coat
- Fits 2017–2018 Ford F-250 and F-350 Super Duty in King Ranch, Lariat, Limited, Platinum, XL and XLT trims
- Holds winches of 12,000 lb or smaller
- Complete bolt-on front bumper with provided brackets that tie to the frame
- One-piece, fully welded, 3/8 inch U.S. steel construction
SKU: FFIFS17-N4160-1 -
Winch Mounting Plate
Fab Fours Winch Mount (Black) – FS11-N2550-1
- Fits 2011–2015 Ford F-250 and F-350 Super Duty per the manufacturer list
- One-piece, fully welded winch mount with 3/8 inch steel mounts
- Slips through factory tow hook slots straight to the frame
- No parts or brackets to bolt together
- Black 2 Stage matte powder coat; bare steel available with -B
- Part number FS11-N2550-1, UPC 5810106171
SKU: FFIFS11-N2550-1 -
Winch Mounting Plate
Fab Fours Winch Mount (Bare Steel) – FS09-N1450-B
- Fab Fours winch mount FS09-N1450-B in bare steel
- Fits 2009–2014 Ford F-150 across FX2, FX4, STX, XL, XLT and Lariat trims
- One-piece, fully welded design with 3/8 inch steel mounts
- Slips through factory tow hook slots to the frame
- Made in the USA
SKU: FFIFS09-N1450-B -
Winch Mounting Plate
Fab Fours Winch Mount (Black) – FS09-N1450-1
- Fab Fours winch mount FS09-N1450-1 in black powder coat
- Fits 2009–2014 Ford F-150 with FX2, FX4, King Ranch, Lariat, XL and XLT trims
- One-piece, fully welded mount in 3/8 inch steel
- Slips through factory tow hook slots straight to the frame
- Bare steel alternative with the -B suffix
SKU: FFIFS09-N1450-1 -
Winch Mounting Plate
Fab Fours Winch Mount – FF15-N3250-B
- Fab Fours winch mount FF15-N3250-B in bare steel
- Fits 2015–2018 Ford F-150 in King Ranch, Lariat, XL, XLT and other trims
- Holds winches of 12,000 lb or smaller on small frames and 16,500 lb or smaller on large frames
- One-piece, fully welded with 3/8 inch steel mounts
- Slips through factory tow hook slots to the frame
SKU: FFIFF15-N3250-B -
Winch Mounting Plate
Fab Fours Winch Mount (Black) – DR10-N2450-1
- Fab Fours winch mount DR10-N2450-1 in black powder coat
- Direct fit to the factory bumper for Dodge Ram 2500 and 3500 (2003–2010) and Ram 2500 and 3500 (2011–2018)
- One-piece, fully welded 3/8 inch steel mounts
- Slips through factory tow hook slots straight to the frame
- Bare steel version available with the -B suffix
SKU: FFIDR10-N2450-1 -
Winch Mounting Plate
Fab Fours Winch Mount (Black) – GM16-N3350-1
- Fits the 2016 Chevy and GMC 1500
- One-piece, fully welded mount in 3/8 inch U.S. steel
- Holds winches up to 12,000 lb
- Slips through factory tow hook slots to the frame, with provided brackets
- Two-stage matte black powder coat, made in the USA
SKU: FFIGM16-N3350-1 -
Winch Mounting Plate
Warn Planetary Winch Mounting Kit (Black) – 13910
- Warn Planetary winch mounting kit 13910 in black
- Mounts the 9.5ti and most other WARN winches to your bumper
- Works with the WARN Rock Crawler bumper, standard factory bumper or optional factory tube bumper
- Marked as not an OE bumper part
SKU: WAR13910 -
Winch Mounting Plate
Rock Hard 4X4 Parts JK Factory Bumper Winch Plate (Black) – RH5010
- Rock Hard 4×4 Parts winch plate RH5010 for the factory bumper on the JK Wrangler
- Bolt-on installation with no cutting for the factory plastic bumper
- Works on 2 and 4-door models; black finish
- Does not require relocating the vacuum pump; not for the 2013 Rubicon 10th Anniversary Edition
SKU: RFPRH-5010
What a winch plate does
A winch is heavy and puts large loads into whatever carries it. The winch plate, mounting tray or mount is the structural interface between the winch and the vehicle, normally attached to a bumper, a frame-mounted cradle or the front crossmember. Without a properly rated plate the winch may twist, crack or tear loose at the worst moment. This category covers plates for stock-style bumpers-bumpers-tire-carriers-winch-mounts-2, trays that sit within an aftermarket bumper and complete winch mounting kits.
Plate styles
- Flat plates: a simple steel plate that bolts to the bumper or crossmember and carries the winch on its face.
- Trays and cradles: a box or tray design that holds the winch in a pocket and can aid the fairlead and cable alignment.
- Vehicle-specific kits: bolt-on sets made for particular trucks or Jeeps, often using factory holes.
- Universal plates: designed to be modified or drilled to your vehicle and winch.
Specs to compare
- Winch bolt pattern: common patterns are measured in inches between the bolt holes, such as 10 inches by 4.5 inches, and the plate must match your winch model.
- Material and thickness: look for steel plate rated for the winch's pulling capacity, and check the finish, such as powder coating, for rust protection.
- Winch rating: make sure the plate is designed for the line pull of your winch, not just its size.
- Fairlead compatibility: roller or hawse fairleads need the right clearance and alignment.
Installation and safe use
Use grade-rated hardware, torque it to specification and use thread locker where the manufacturer calls for it. Mount only to structural points designed for the load, and check that the bumper itself is rated for winching. A bumper made of thin sheet metal may not be suitable. Recheck all bolts after the first off-road use. Because winching puts heavy loads on the vehicle and the people nearby, follow the winch manufacturer's safety guidance, use gloves and a line damper, and consider professional installation.
Fitment
Confirm fitment for your exact vehicle, bumper and winch model, and compare dimensions against the manufacturer's specifications before choosing.
Think about the whole recovery system rather than the plate alone. A winch pulls through the fairlead, the cable and the vehicle's recovery points, and a weak link anywhere reduces the safe capacity. Make sure the bumper or crossmember that holds the plate is strong enough, and that the frame behind it is sound. Corrosion, cracks and prior collision repair can weaken a mounting point, so inspect them before adding a heavy winch.
Electrical and cable considerations follow the mount. Leave room for the winch motor, the solenoid pack and the battery cables, and keep the cables away from sharp edges and heat. Match the fairlead type to the cable, using a roller fairlead with steel cable and a hawse fairlead with synthetic rope. Check the cable angle and spooling at the drum when installing, so the line wraps evenly. Keep the plate and hardware clean and lightly oiled or coated, and inspect bolts and welds for cracks periodically, especially after heavy pulls and winter driving.
Related guides
- Winch Sizing Made Simple: Ratings, Rope and Recovery Gear
Popular Winch Mounting Plate brands
- Fab Fours (17)
- Warn (6)
- Smittybilt (3)
- Rugged Ridge (3)
- Trail Gear (2)
- Go Rhino (2)
- Jeep (2)
- Westin (2)
- Rampage (2)
- Tomken Machine (1)
- Warrior (1)
- Rock Hard 4x4 Parts (1)
Winch Mounting Plate FAQ
How do I know a plate fits my winch?
Compare the winch's mounting hole pattern in the manual with the plate's stated bolt pattern. Winches use standard patterns, but not all plates carry every pattern. Also check the footprint and capacity.
Can I mount a winch on a stock bumper?
Only if the bumper is built for it, and most stock bumpers are not. Many owners choose a winch-ready aftermarket bumper or a frame-mounted tray. Check the manufacturer's instructions and capacity.
Is a thicker plate always stronger?
Thickness helps but design, material, welds and mounting points matter as well. A plate rated for your winch's pull and bolted to structural frame points is safer than thick plate on a weak mount.
Do I need to upgrade the plate for a larger winch?
Often yes. A larger winch has a different bolt pattern, size and load, so check the plate's rating and dimensions. Use a plate made for the winch you install.












