Overview
The Fab Fours winch mount GM16-N3350-1 is a one-piece, fully welded front winch mount in black powder coat, made for the 2016 Chevrolet and GMC 1500 pickup. It carries a winch on the front of the truck and slides through the factory tow hook slots so its ends reach the frame, with no separate brackets to assemble.
The mount holds a winch of 12,000 lb or smaller. Warn Zeon 8, 9 or 10 and the Warn 9.5 CTI are recommended winches for small frames. It works as a complete bolt-on front bumper setup, with provided brackets that tie straight to the frame.
Key features
- One-piece design, fully welded, with no parts or brackets to put together
- Slips through the factory tow hook slots straight to the frame
- Provided brackets tie the mount directly to the frame for a bolt-on bumper setup
- Built from 3/8 inch U.S. steel
- Two-stage matte black powder coat finish
- Holds winches of 12,000 lb or smaller
Winch mount load and wiring
A winch mount carries the full pulling load through the frame, so the frame and tow hook area need to be solid before use. Inspect the frame rails and the hook slots for rust, cracks or bends. Surface rust can hide weakened metal, so clean and treat any corroded spots before installing the mount.
Choose a winch whose rated line pull and weight stay within the mount’s 12,000 lb capacity. A heavier winch adds stress at the mount and at the bracket points, so keep that rating in mind when choosing cable length. Wire the winch through heavy-gauge cable, a fused circuit and a solenoid rated for the winch’s current draw.
Check the mount after each use. Look at the powder coat near the welds, since chips can let rust start at the seams. Re-check the bolts holding the brackets to the frame after the first few trail trips, and touch up scratches with matching touch-up paint.
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | GM16-N3350-1 |
| UPC | 5810113476 |
| Material | 3/8 inch U.S. steel |
| Finish | 2 stage matte black powder coat |
| Winch capacity | 12,000 lb or smaller |
| Mount type | One-piece, fully welded winch mount |
| Recommended winches (small frames) | Warn Zeon 8, 9 or 10; Warn 9.5 CTI |
| Made in | USA |
Vehicle fitment
It fits the 2016 Chevrolet and GMC 1500 pickup.
It fits the 2016 model year 1500 series. For 2500 HD or 3500 HD trucks, the Ford F-150, or other model years, confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Installation uses the factory tow hook slots and the provided brackets that tie to the frame. Keep the winch at or under the 12,000 lb limit and match it to the small-frame winch recommendations above.
What’s included
One-piece fully welded winch mount with the provided brackets that tie directly to the frame.
Not included: the winch. No winch is listed with this mount.














