Overview
The Fab Fours FS11-N2550-1 is a black powder-coated winch mount for the 2011–2015 Ford F-250 Super Duty and F-350 Super Duty. It gives a front-mounted winch a steel base that connects straight to the frame through the factory tow hook slots.
The Fab Fours FS11-N2550-1 is a one-piece, fully welded winch mount built from 3/8 inch steel. It has no separate brackets or plates to assemble, and it is made in the U.S.A.
Key features
- One-piece winch mount, fully welded
- Slips through the factory tow hook slots to hook straight to the factory frame
- No parts or brackets to bolt together
- 3/8 inch steel mounts
- Black 2 Stage matte powder coat finish
- Bare steel version available, with -B in place of -1 in the part number
Before you buy
A front winch mount ties the winch to the frame, so the frame and the tow hook area carry the pulling load. Before installing, inspect the frame rails and the factory tow hook slots for rust, cracks or old damage. A winch mount is only as strong as the metal it bolts to, so a sound frame matters as much as the mount itself. Plan the winch size, cable or synthetic rope, and fairlead together so the setup matches the load you expect.
Front-mounted winches are often paired with a fairlead and a rated hook or shackle, and those parts wear out with use. Look over the rope or cable for fraying and kinks each time you use the winch. Keep the mount’s powder coat intact, since chips in the finish are where surface rust starts on steel parts.
- Inspect frame rails before mounting
- Match winch rating to the mount
- Check rope or cable for fraying
- Replace worn hooks and shackles
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FS11-N2550-1 |
| UPC | 5810106171 |
| Mount material | 3/8 inch steel |
| Construction | One piece, fully welded |
| Finish | Black 2 Stage matte powder coat |
| Alternate finish | Bare steel (-B in place of -1) |
| Mounting | Slips through factory tow hook slots to the factory frame |
| Origin | 100% made in the U.S.A. |
Vehicle fitment
It fits the 2011–2015 Ford F-250 Super Duty and F-350 Super Duty in King Ranch, Lariat, Platinum, XL and XLT trims.
It is designed for the 2011–2015 Ford F-250 and F-350 Super Duty. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Slide the mount through the factory tow hook slots until it reaches the frame. Installation uses no brackets to assemble. Check the winch’s rated capacity against the mount before pulling any load.
What’s included
The product is the winch mount itself, a single fully welded unit. No additional hardware is described.
Not included: A winch, which must be obtained separately, is needed to use the mount.












