Overview
The Fab Fours FS09-N1450-1 is a black powder coat, one-piece winch mount for the 2009–2014 Ford F-150. It is fully welded and built to fit the factory bumper, with no separate brackets to assemble. It slides through the factory tow hook slots to reach the frame. The -1 version is the black finish, and a bare steel -B version is also listed.
It is made in the U.S.A. from 3/8 inch steel and is built for strength and durability. It fits a broad range of F-150 trims, from FX2 and STX up to Lariat, King Ranch and Platinum.
Key features
- One-piece, fully welded design
- No parts or brackets to bolt together
- Slips through factory tow hook slots straight to the frame
- 3/8 inch steel mounts
- 2 stage matte black powder coat finish
- Bare steel version available with the -B suffix
- Made in the U.S.A.
Choosing a winch to match
A winch mount is only as useful as the winch bolted to it. Before buying, match the winch’s rated pull to the mount and to the load you expect on trail. Heavier winches put more stress on the frame and the mount, so a rating that comfortably covers your typical recovery is a sensible target. Compare the winch’s mounting pattern and hardware against the mount so the parts line up without modification.
Because the mount slides through the factory tow hook slots, the bumper and tow hook area take on the load during a pull. Inspect the welds and powder coat after rough use, and touch up chips on bare steel to slow surface rust. Recheck the winch fasteners after the first few trail runs, since new hardware can settle.
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FS09-N1450-1 |
| UPC | 5810106195 |
| Material | 3/8 inch steel mounts |
| Finish | Black, 2 stage matte black powder coat |
| Construction | One piece, fully welded |
| Fit type | Direct fit to OE bumper |
| Alternate finish | Bare steel (-B instead of -1) |
| Made in | USA |
Vehicle fitment
It fits the 2009–2014 Ford F-150 in FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, XL and XLT trims.
The 2015–2018 F-150 and the 2011–2015 F-250 and F-350 Super Duty are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation runs through the factory tow hook slots to the frame. Check the winch’s rated capacity against this mount before pulling any load.
What’s included
One-piece winch mount in black powder coat.
Not included: a winch.












