Trailer Connector Kit
Showing 37–48 of 52 resultsSorted by popularity
-
Trailer Connector Kit
Curt Manufacturing Wiring T-Connectors – 55316
- Fits 1987–1996 Ford F-150, F-250 and F-350, plus 1993–1995 F-150 Lightning
- Curt Manufacturing 2-wire T-connector, part number CRT55316
- Plugs direct into the factory harness with a 4 pin connector
- Install time listed at 5 min
SKU: CRT55316 -
Trailer Connector Kit
Curt Manufacturing Wiring T-Connectors – 55312
- Curt Manufacturing 55312 wiring T-connector with a standard 2-wire system
- Plugs directly into the factory harness
- Includes a 4 pin connector, dust cap and ground wire with self tapping screw
- Curt lists fitment for 1985–1997 Chevrolet and GMC trucks and Suburbans, plus the S10, Sonoma, Jimmy, Syclone and Isuzu Hombre
SKU: CRT55312 -
Trailer Connector Kit
Curt Manufacturing Vehicle To Trailer Connector with Harness – 56096
- Fits 2010–2016 Cadillac SRX Base, Luxury, Performance and Premium
- Plugs into existing vehicle socket for a 4-way flat trailer socket
- Dust cover included; plug-and-play, no splicing
- Install time 5 min.; made in USA; part number CRT56096
SKU: CRT56096 -
Trailer Connector Kit
Curt Manufacturing Replacement OEM Tow Package Wiring Harness – 56042
- Replacement OEM tow package wiring harness for 2008–2019 Toyota Highlander
- Plugs into the existing vehicle socket to provide a 4-way flat socket
- Plug-and-play design, no splicing; standard 2-wire system
- Dust cover included; install time 20 min.
- Made in USA; part number CRT56042
SKU: CRT56042 -
-
Trailer Connector Kit
Curt Manufacturing Custom Wiring Connector – 56420
- Fits 2019–2021 Hyundai Santa Fe, 2020–2021 Hyundai Palisade, 2022 Hyundai Tucson and 2020–2021 Kia Telluride
- Plugs into the OEM vehicle socket for a 4-way flat trailer output
- Requires the factory (OEM) tow package
- Includes a tail light converter and rubber dust cover
- Part number CRT56420
SKU: CRT56420 -
Trailer Connector Kit
Curt Manufacturing Custom 4-Way Wiring Harness – 56426
- Fits 2014–2021 Jeep Grand Cherokee and 2021 Grand Cherokee L in the trims shown
- Curt 4-way flat wiring harness, part number CRT56426
- Plugs into the taillight assembly; plug-and-play, no cutting or splicing
- Includes tail light converter, fuse holder and battery connection wiring
- Battery connection must be fuse-protected, 10-amp maximum
SKU: CRT56426 -
Trailer Connector Kit
Curt Manufacturing Custom 4-Way Flat Wiring Harness – 56452
- Manufacturer fitment list names the 2020–2021 Toyota Highlander
- Part number CRT56452, Curt custom 4-way flat wiring harness
- Tail light converter and fuse holder with battery wiring included
- Battery connection must be fuse-protected, 10-amp max
- Check your vehicle against the 2020–2021 Toyota Highlander trims before buying
SKU: CRT56452 -
Trailer Connector Kit
Curt Manufacturing Custom 4-Way Flat Wiring Harness – 56027
- Fits the 2008–2012 Buick Enclave and 2010–2012 Chevrolet Traverse
- Part number CRT56027, Curt custom 4-way flat wiring harness
- Plugs into the taillight assembly with no cutting or splicing
- Dust cover and CURT Easy-Mount bracket described
- Confirm the trim before ordering, especially LTZ
SKU: CRT56027 -
-
-
What a trailer connector kit does
A trailer connector kit carries tail, brake and turn signal circuits from the vehicle to the trailer plug. Vehicle-specific T-connector harnesses tap into the factory tail light wiring through plugs that match the original connectors, so you usually do not cut or splice the vehicle wiring. They end in a standard connector at the hitch.
Common connector types
Learn the plug your trailer uses before choosing a kit.
- 4-way flat is the common light-duty plug carrying tail, brake and left and right turn signals.
- 6-way square adds circuits for functions such as electric brakes or auxiliary power.
- Converter harnesses, listed as 3-wire systems, change a vehicle with combined brake and turn lights to the separate circuits that a trailer expects.
- OEM replacement tow package harnesses restore a factory-style plug on a vehicle that came with a tow package.
Choosing the right kit
Check whether your vehicle has a 2-wire or 3-wire system, which describes how the tail lamps combine brake and turn functions. Confirm whether the vehicle was built with the factory tow package, because kits are listed as with or without it. Install time on the sample listings runs from about 5 to 45 minutes, which gives a rough idea of how involved each wiring harness is.
Look at the harness length, the type of plug at the end, and whether additional parts such as a mounting bracket are included. Always verify the exact year, make, model and trim on the product page and in the manufacturer's application guide.
Installation and testing
Disconnect the battery if the instructions call for it, secure the harness away from heat and moving parts, and use dielectric grease on connections to resist corrosion. Mount the connector so it does not drag on the ground or bind during articulation.
After installation, test every circuit with the trailer or a test light: tail lights, brake lights and both turn signals. Some vehicles with sensitive lighting systems need a converter or a powered module, so follow the kit's instructions. Remember that electric brake trailers also require a brake controller, which is separate.
Wiring, grounding and troubleshooting
Most trailer lighting problems trace back to a poor ground or a corroded connection rather than a faulty harness. The white ground wire should attach to clean bare metal on the vehicle frame or body, and the trailer needs its own solid ground to its frame. Check both ends before assuming a bulb or wire has failed.
- Use a test light or multimeter at the connector to confirm each circuit on the vehicle side
- Look for green corrosion or bent pins inside the plug, and clean with electrical contact cleaner
- Avoid tapping wires in a way that exposes copper, and use heat-shrink or sealed connectors outdoors
- Secure the harness with ties away from the exhaust and moving suspension parts
- Leave enough slack for the hitch to articulate through full turns
If the trailer lights flicker or work only when you wiggle the plug, suspect the plug, the ground or a damaged wire. Many vehicles also protect their tail light circuits with a fuse, and a blown trailer-circuit fuse is a quick thing to check. When adding to a vehicle with advanced electronics, follow the manufacturer's wiring instructions so the body control system is not overloaded.
Popular Trailer Connector Kit brands
Trailer Connector Kit FAQ
What is the difference between 4-way and 6-way connectors?
A 4-way flat carries tail, brake and turn signals. A 6-way square includes the same plus circuits for functions like electric brakes or auxiliary power, so choose what your trailer needs.
Will a T-connector harness require cutting wires?
Vehicle-specific T-connectors usually plug into factory tail light connectors, so no cutting is required. Universal kits and some older vehicles may need splicing, so check the instructions.
Do I need a converter for my vehicle?
If your vehicle shares brake and turn signals on one filament, a converter is needed to separate them for the trailer. Check your vehicle's wiring type and the listing's notes.
Does this kit power trailer brakes?
A connector kit supplies lighting circuits. Electric trailer brakes need a brake controller and the proper wiring, which is a separate component from a trailer light connector.











