Lighting & Lighting Accessories
Showing 1057–1068 of 2467 resultsSorted by popularity
-
Light Mounting Brackets & Cradles
Rigid Industries A-Pillar Bar Mount System (Black ) – 42230
- Clamps to the A-pillar of a UTV as a tube mount for Rigid Industries D-Series, SR-M, or SR-Q LED lights
- Compensates for the forward angle of the A-pillar to make light positioning easier
- Made in the USA from light-weight, black anodized billet aluminum
- Part number 42230, UPC 815711011845
- Universal fit, no specific vehicle tied to it
SKU: RIG42230 -
Light Mounting Brackets & Cradles
Rigid Industries LED Clamp System (Black ) – 42220
- Rigid Industries LED clamp system, part number 42220
- Two adjustable mounts, one at each end of one light bar
- Up to 1 inch of adjustment per mount
- Black anodized billet aluminum, tube mount type
- Universal Fit; UPC 815711011753
SKU: RIG42220 -
Light Mounting Brackets & Cradles
Rigid Industries 2.00″ Horizontal Bar Mount – 42040
- Rigid Industries 2.00-inch horizontal bar mount, part number 42040
- Mounts D-Series, SR-M or SR-Q LED lights to a horizontal tube
- Black anodized billet aluminum, made in the USA
- LED light not included
- UPC 815711010855
SKU: RIG42040 -
Light Mounting Brackets & Cradles
Rigid Industries 20 Inch E-Series Cradle Mount (Black ) – 42010
- Rigid Industries 20 Inch E-Series cradle mount, part number 42010
- U-shaped cradle for holding Rigid Industries LED light bars
- Black finish with hardware included
- UPC 815711015041
- No specific vehicles named; fitment field reads Universal Fit
SKU: RIG42010 -
Fog Lights
Rigid Industries Dual Fog Light Kit – 41616
- Rigid Industries 41616 dual fog light kit for the 2017-Current Ford Super Duty
- Mounts 4 Rigid D-Series (Dually or D2) LED lights in both OEM fog lamp locations
- Stainless steel adaptor plates with black powder-coat
- Limited lifetime warranty from Rigid Industries
SKU: RIG41616 -
-
Fog Lights
Rigid Industries Single Fog Light Kit – 41614
- Rigid Industries 41614 fog light kit for the 2017-Current Ford Super Duty
- Mounts 2 Rigid D-Series (Dually or D2) LED lights in both fog light locations
- Stainless steel adaptor plates with black powder-coat finish
- Backed by Rigid Industries’ limited lifetime warranty
SKU: RIG41614 -
Fog Lights
Rigid Industries Raptor Triple Fog Mounting Light Kit – 41611
- Mount kit for 6 Rigid D-Series LED lights, part number 41611
- Stainless steel adaptor plates with black powder-coated finish
- Made for the 2017-current Ford Raptor fog light locations
- D-Series lights are sold separately
SKU: RIG41611 -
Fog Lights
Rigid Industries Raptor Triple Fog Light Kit – 41610
- Mounts 6 D-Series LED lights in Ford F-150 Raptor OEM fog lamp locations
- Rigid lists fit for 2017–2018 Ford F-150 (Raptor)
- Stainless steel adaptor plates, black powder-coated, no drilling
- Everything needed to install the lights in both locations
- Part number 41610
SKU: RIG41610 -
Light Mounting Brackets & Cradles
Rigid Industries 1.125 Inch Horizontal Bar Mount – 41240
- Rigid Industries 1.125 Inch horizontal bar mount, part number 41240
- Single mount for D-Series, SR-M or SR-Q LED lights on a horizontal tube
- Black anodized billet aluminum, made in the USA
- Universal fit; LED light sold separately
SKU: RIG41240 -
Light Mounting Brackets & Cradles
Rigid Industries 1.125 Inch Adjustable Clamp System (Black ) – 41120
Light Mounting Brackets & CradlesRigid Industries 1.125 Inch Adjustable Clamp System (Black ) – 41120
- Rigid Industries 1.125 inch adjustable clamp system, part number 41120
- Two adjustable mounts, one for each end of one light bar
- Up to 1 inch of adjustment per mount
- Black anodized billet aluminum, universal fit, tube mount type
- UPC 815711010183
SKU: RIG41120 -
Light Mounting Brackets & Cradles
Rigid Industries 10 Inch SR-Series Light Cradle (Black ) – 41090
- Rigid Industries 10 inch SR-Series light cradle, part number 41090
- Designed for Rigid Industries SR-Series LED light bars
- Universal Fit with universal mounting type
- Stainless steel with powder-coated satin black finish
- Made in the USA
- UPC 815711011876
SKU: RIG41090
What this category covers
Lighting for a 4x4 falls into two broad groups. The first is auxiliary lighting added to the vehicle: light bars, pod lights, fog and driving lamps, work lamps and rock lights. The second is replacement and repair lighting: headlights, tail and brake lights, side markers, bulbs, bezels and sockets that restore factory function. The subcategories here separate these so you can go straight to the type you need.
Choosing auxiliary lights
Start with what the light needs to do. Driving lights throw a longer, narrower beam for high-speed visibility on dirt roads. Fog lights spread low and wide to cut under dust and mist. Flood or work lamps light the area around the vehicle for camp and recovery tasks. Light bars combine these roles depending on optics, and many offer combination or hybrid beam patterns.
- Beam pattern: spot for distance, flood for width, combo for general use.
- Housing and sealing: look for an ingress protection rating suited to water crossings and pressure washing.
- Lens material: polycarbonate resists rock strikes better than glass but can scratch.
- Power draw: confirm the lamp's amperage against your wiring and alternator capacity.
Replacement lamps and bulbs
For factory-style repair, match the lamp to the exact year, make, model and side of the vehicle. Bulb type matters: halogen, HID and LED units are not always interchangeable in the same housing, and a poorly matched LED can scatter light and blind oncoming drivers. Check the bulb designation on the old unit or in the owner's manual before ordering.
Wiring and installation
Auxiliary lights should be wired through a relay with a correctly rated fuse, not straight from a switch. Use wire gauge appropriate for the current and length of run, seal connectors against moisture, and mount lights solidly so vibration does not loosen them. Accessory brackets and cradles are sold separately for many light bars, so confirm what is included in a given kit.
Legal and compatibility notes
Rules on auxiliary lighting vary by state. Many jurisdictions restrict forward-facing lights on public roads, require covers when not off-road, or limit color. Check your local regulations. Confirm fitment for your exact vehicle and review the manufacturer's specifications before installing.
A few habits make lighting upgrades last. Keep a short list of the bulb types and lamp part numbers on your vehicle, because side markers, headlights and tail lights often differ between model years and trims. When mounting auxiliary lights, aim them after installation on level ground at a wall or garage door, so the beam lands where you intend rather than into the eyes of other drivers. Inspect wiring for chafing after rough trips, and dab dielectric grease on connectors to resist corrosion. Replacement lenses and covers are sold for many popular lamps, so a cracked lens does not always mean a new light. Finally, think about total electrical load: several high-output lamps running at once can strain a stock alternator, particularly with a winch or fridge on the same system. Keep spare fuses and a small supply of weatherproof connectors in the vehicle, since a blown fuse is the most common reason a light stops working on the trail.
Popular Lighting & Lighting Accessories brands
- Rigid Industries (755)
- Hella (204)
- KC HiLites (189)
- Rugged Ridge (146)
- Spyder Auto Group (122)
- Oracle Lighting (108)
- Recon (101)
- Crown Automotive (100)
- Piaa Lighting (99)
- Omix-Ada (88)
- Baja Designs (83)
- JW Speaker (74)
Shop Lighting & Lighting Accessories by type
- Fog & Driving Lights (328)
- Offroad Racing (328)
- Offroad Racing Fog & Driving Lights (537)
- Lens Covers and Shields (251)
- Light Mounting Brackets & Cradles (290)
- Headlights Housings and Conversions (198)
- Replacement Headlights, Tail Lights & Bulbs (227)
- Replacement Bulbs (141)
- Tail & Brake Lights (129)
- Headlights (97)
- Side Marker Light Assembly (77)
- LED Replacement Bulbs (85)
- Light Bar Mounting Kit (64)
- Lighting Accessories (64)
- Headlight & Tail Light Bezel Sets (51)
- Fog/Driving Light Wiring Kit (35)
- Third Brake Lights (34)
- Auxiliary Lighting (32)
- Work Lamp (20)
- Roof Marker Light (20)
- Multi-Use Accent Lights (18)
- Headlight Switch (16)
- Work Lamps (11)
- License Plate Lighting (8)
- Side Marker Light Socket (8)
- Third Brake Light Bracket (8)
- Fog/Driving/Offroad Light Lens (7)
- Reverse / Backup Lights (5)
- LED Resistor (6)
- Off Road Light Bezel Sets (6)
Lighting & Lighting Accessories FAQ
What is the difference between driving lights and fog lights?
Driving lights produce a longer, tighter beam to extend your reach at speed. Fog lights produce a wide, flat beam mounted low to reduce glare off dust, rain or snow. They solve different problems, and many vehicles carry both.
Do I need a relay to install a light bar?
Yes, in most cases. A relay lets a small switch control a high-current circuit, and an inline fuse near the battery protects the wiring. Follow the lamp maker's wiring diagram and use wire sized for the current draw.
Can I replace halogen bulbs with LED bulbs?
Sometimes, but the housing was designed around a halogen filament. LED retrofit bulbs can produce poor beam patterns or glare in reflector housings. Check that the product is intended for your vehicle and review local lighting regulations.
Are off-road lights legal to use on the street?
Rules vary by state and usually restrict how auxiliary lights may be mounted, wired and used on public roads. Many require covers or separate switching. Check your local regulations before driving with them on.









