Overview
The Rigid Industries 1.125 inch adjustable clamp system, part number 41120, is a set of two tube mounts for holding one Rigid Industries light bar. One mount goes at each end of the bar, and each adjusts up to 1 inch so the light can be aimed where you need it.
The mounts are made in the USA from lightweight black anodized billet aluminum. They use a tube mount type and are built for universal fit rather than one vehicle.
Key features
- Two adjustable mounts, one at each end of a light bar
- Up to 1 inch of adjustment per mount
- Lightweight black anodized billet aluminum
- Tube mount type
- Made in the USA
Aiming and adjusting the mounts
Two mounts working as a pair hold the bar steady, but each one has to be set to the same reference so the light stays level. Adjust one end, then the other, in small steps. This prevents the bar from twisting and keeps the beam centered on the line you want.
Tightening is where most problems start. Snug each clamp just enough that the bar cannot rotate by hand, then recheck after a few miles of rough road. Overtightening can crack the aluminum or strip threads, while undertightening lets vibration gradually shift the aim. Keep track of the aim you set so you can return to it quickly.
Wiring and the bar’s cable exit point also influence how you set the clamps. Route the harness so it does not pull on the light when you adjust the angle, and leave a little slack at each mount so movement does not stress the connectors.
- Set both mounts before the final tightening
- Mark the tube position once the aim is right
- Inspect the clamp surfaces for scoring after each rough trip
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 41120 |
| UPC | 815711010183 |
| Size | 1.125 inch |
| Mounts included | 2 |
| Adjustment | Up to 1 inch |
| Material | Billet aluminum |
| Finish | Black anodized |
| Mounting type | Tube Mount |
| Color | Black |
| Fitment | Universal Fit |
Vehicle fitment
The 41120 clamp system is a universal-fit accessory, so it is not tied to a vehicle year, make, model or trim.
Check that the 1.125 inch size in the product name suits your bar and mounting tube before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both mounts are used together on one light bar, one at each end. Position each mount within its up to 1 inch of adjustment to aim the light.
What’s included
Two (2) adjustable mounts, one for each end of one light bar.
Not included: the Rigid Industries light bar the mounts hold.









