Offroad Racing
Showing 109–120 of 328 resultsSorted by popularity
-
Offroad Racing
Rigid Industries Scene LED Light – 68131
- Rigid Industries Scene LED Light, part number 68131, for DC-powered area lighting
- 115-degree horizontal spread
- Thermally optimized heatsink and LED technology
- Minimal amp draw for the total lighting solution.
- Universal fit, not tied to a specific vehicle
SKU: RIG68131 -
-
-
-
-
-
-
Offroad Racing
Rigid Industries R-Series Diffused LED Light – 62120
- Rigid Industries 62120 is an R-Series 36 Retrofit diffused LED light sold as a single unit.
- Works as a drop-in replacement for a PAR36 light or in a fog light position.
- Round housing with a curved lens, bracket mounting and an advanced heat sink.
- Universal fit, so no specific vehicle applies.
SKU: RIG62120 -
-
Offroad Racing
M-Series Dually 60 Deg. Diffusion LED Light
- Rigid Industries 602513 is an M-Series Dually 60 Deg. Diffusion LED light pod, sold as a set of two.
- Side-shooting LEDs widen the beam, with up to 120 degrees of horizontal coverage.
- Up to 102% more raw lumens depending on the optics chosen.
- Clear lens, LED bulb type, square bracket-mount pod.
- Universal fit, so it is not tied to one vehicle.
SKU: RIG602513 -
Offroad Racing
D-Series Dually HD D2 60 Deg Diffusion LED Light
- Rigid Industries 522513, a Dually HD D2 LED kit named 60 deg diffusion
- Side-shooting LEDs widen the spread beam.
- Up to 102% more raw lumens depending on optics chosen
- Bracket mounting type with clear lens and square shape
- Universal fit listed; no specific vehicle years or models named
SKU: RIG522513 -
Offroad Racing
D-Series Dually D2 Driving LED Light
- Universal-fit Rigid Industries driving light, part 522313
- LED bulb type with Spot, Flood or Driving optics
- Up to 120 degrees of horizontal coverage in pairs or as a single light
- Up to 102% more raw lumens, depending on the optics chosen
- Square clear-lens housing with bracket mounting
- Sold as a kit
SKU: RIG522313
What belongs in this category
Off-road racing lighting covers auxiliary lamps added to a vehicle beyond its factory headlights. The listings here include long LED light bars in single-row and double-row designs, compact cube and round pods, flush-mount and surface-mount lamps, windshield and roof bracket kits, and a few bulb kits for fog lamps. Many pieces are sized for Jeeps, trucks and side-by-sides.
Choosing a beam pattern
Beam pattern matters as much as raw output. A spot beam throws a narrow, long-reaching column of light that helps at higher speeds on open terrain. A flood beam spreads light wide and close, which suits slow rock crawling and wooded trails. Driving and combo patterns mix the two. Diffusion optics soften and widen the light to reduce glare near the vehicle. Many drivers pair a combo bar up high with flood pods low or on the corners.
Specs worth comparing
- Lumens and, more usefully, how the maker rates the beam distance and spread.
- Housing material, lens material and the ingress rating (IP67 or higher is common for dust and water resistance).
- Operating voltage and current draw, so you can size wiring, fuse and relay correctly.
- Mount style: surface, flush, bumper, roof, A-pillar or windshield bracket.
- Whether a wiring harness, switch and hardware come in the box.
Wiring and installation
Use a relay-driven harness with an inline fuse rated for the lights' draw rather than wiring lamps directly through a dash switch. Keep connections sealed, route wires away from heat and moving parts, and avoid drilling roof or body panels without a plan for sealing the holes. Aim lamps after mounting and tighten brackets securely, since vibration on trails loosens hardware.
Think about how the lights will be used before comparing sizes. A trail rig that crawls slowly benefits from wide flood coverage at the bumper or A-pillar, while a truck that runs fast gravel roads or desert washes wants a long-throw bar. Pods mounted low reduce the glare that bounces back off dust, fog and rain, and a bar mounted high throws light farther over the hood. Do not mount lamps where they block the radiator airflow or where the brackets could be struck by brush.
Heat is another point to consider. LED housings use fins or a solid aluminum body to shed heat, and good thermal design is part of why a quality LED lamp keeps its brightness. Make sure the mounting surface gives the housing some air, and check that lenses are polycarbonate or similarly impact resistant, since rocks and branches are a fact of life off-road. A clear cover can protect lenses from stone chips when the lamps are not in use.
Legal and fitment notes
Auxiliary lights are often intended for off-highway use. Rules on lamp color, number of lamps and use on public roads vary by state, so check local regulations and cover lights when on pavement if required. Confirm mounting points and bracket compatibility for your exact year, make and model, and read the manufacturer's specifications before choosing a product below.
Popular Offroad Racing brands
- Rigid Industries (218)
- KC HiLites (49)
- Hella (35)
- Rugged Ridge (26)
- Vision X Lighting (25)
- ARB 4x4 Accessories (20)
- Piaa Lighting (15)
- Pro Comp Suspension (11)
- Spyder Auto Group (11)
- JW Speaker (10)
- Westin (9)
- RT Off-Road (5)
Offroad Racing FAQ
What is the difference between spot and flood LED lights?
A spot beam is narrow and reaches far down the trail, while a flood beam spreads wide and lights the area close to the vehicle. Combo lights blend both patterns. Many off-roaders mix them, using spot for distance and flood for slow technical terrain.
Can I use off-road LED lights on the street?
In most states, auxiliary off-road lights are meant for off-highway use only and may need to be covered or switched off on public roads. Rules differ by state, so check your local regulations and the manufacturer's guidance before driving on pavement with them on.
Do I need a relay for an LED light bar?
A relay is strongly recommended. It lets a small switch control the load while power flows through a fused wire straight from the battery. This protects the switch and wiring and gives the lights consistent voltage, especially with longer bars or several pods.
What does an IP67 rating mean on a light?
IP67 means the housing is sealed against dust and can survive temporary immersion in water, typically up to one meter for 30 minutes. It is a common benchmark for off-road lights that see rain, mud and creek crossings. Check the maker's listed rating for each model.











