Overview
The Rigid Industries D-Series Dually D2 driving LED light, part number 522313, is a compact square LED light pod built for wide-spread forward lighting. It is also identified as the D-SS PRO Dually-Side Shooter Professional Race Output LED pod. It is universal fit with bracket mounting.
The light suits applications that call for a wide spread beam, including A-pillar mounting, fog light positions and motorcycle applications. Its main forward-facing LEDs are offered with Spot, Flood or Driving optics, and side-shooting LEDs add light to the sides for a much broader beam. Because the light is universal fit rather than built for one vehicle, the mounting position and beam pattern should be matched to the specific use before installation.
Key features
- Main forward-facing LEDs available with Spot, Flood or Driving optics.
- Side-shooting LEDs add a much broader beam to the main output.
- Pairs carry three side-shooting LEDs on one side of each fixture.
- Single-light setups have a pair of side-shooting LEDs on both sides of the fixture.
- Up to 120 degrees of horizontal lighting coverage in pairs or as a single light.
- Up to 102% more raw lumens, depending on the optics chosen.
- Compact square housing with bracket mounting.
Choosing the right optic
Optic choice shapes how the light performs off the road. A spot pattern reaches farther along a narrow line, while a flood or driving pattern spreads light across a wider area near the vehicle. Side-shooting LEDs widen the overall coverage, which helps when the light is used at sharp angles or in tight trails.
Mounting position is the second decision. Pillar and bumper positions change the angle of the beam, so test the aim at the actual mounting height before tightening the bracket. Plan the harness route so it does not pass near hot exhaust, sharp edges or the steering linkage. A fused relay keeps switch current away from the factory circuit and makes troubleshooting easier if the light stops working.
- Aim low for fog-style work
- Keep the lens clean for full output
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 522313 |
| UPC | 849774027208 |
| Product type | Driving light |
| Bulb type | LED |
| Lens color | Clear |
| Light shape | Square |
| Mounting type | Bracket |
| Sold as | Kit |
| Fitment | Universal fit |
| Size | Universal fit with no year, make, model or trim applied. |
| Horizontal coverage | Up to 120 degrees |
| Raw lumen increase | Up to 102%, depending on optics |
Vehicle fitment
Because the light is universal fit, no year, make, model or trim applies. Mounting positions such as A-pillars, fog light locations and motorcycle applications depend on the bracket and available space, so check clearance before fastening.
Universal fit means no vehicle list applies. Confirm the bracket position, beam pattern and clearance suit your application before ordering.
Installation notes
The light uses a bracket mount, so settle the bracket position and clearance before drilling or fastening anything. Driving lights usually run through a fused relay wiring setup, and local rules on auxiliary lights for road use vary, so check them before installing on a street-driven vehicle or motorcycle.
What’s included
Check the packing list for bracket hardware and any wiring parts before starting the install.
Not included: Plan on supplying a wiring harness, relay and other electrical parts unless the packing list shows them.









