Overview
The Trail Master nitrogen gas twin tube shock absorber (part number TM73265005) is a front shock for 2007–2018 Jeep Wrangler JK models, in both 2-door and 4-door form. It is designed for a 3 to 4 inch suspension lift.
The shock is nitrogen stabilized and uses 10-stage velocity sensitive valving. The piston rod is 5/8 inch and chrome hardened, and the optional shock boot is a separate part that is not included with the shock.
This front shock fits the JK in 2-door and Unlimited 4-door form, with a 3 to 4 inch lift range. It covers the 70th and 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims. The rear JK shock is a different part with its own fit, so keep the two positions separate when comparing options.
Key features
- Front position for JK Wranglers
- Twin tube nitrogen stabilized design
- 10-stage velocity sensitive valving
- 5/8 inch chrome hardened piston rod
- Designed for a 3 to 4 inch lift
- Nitrogen gas charge
Before you buy
Front shocks handle the weight shift that happens when a Wrangler brakes, turns and drops into ruts. On a lifted JK the geometry changes, so the damper has to control more movement than it would at stock height. Twin tube nitrogen designs keep the working oil and gas apart, which helps the shock respond steadily when it heats up on long descents or repeated climbs.
Choosing a shock starts with the lift height and the trim you drive. A damper sized for a 3 to 4 inch range is a poor match for a lower lift, and mismatched damping can make the front end feel loose or harsh. If your build uses a shock boot, buy it separately, since the boot is not part of the box. Fronts are usually replaced side by side so both corners respond the same way.
- Inspect the mounting bushings and hardware when the shock is removed
- Look for oil film on the body or seep around the shaft seal
- Test for knocking or bounce after a rough trail run
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM73265005 |
| Shock series | Nitrogen gas twin tube |
| Location | Front |
| Shock type | Twin tube, nitrogen stabilized |
| Valving | 10-stage velocity sensitive |
| Piston rod | 5/8 inch chrome hardened |
| Lift range | 3 to 4 in |
| Shock boot | Optional, separate part |
| Fitment | Direct fit |
Vehicle fitment
This front shock fits the 2007–2018 Jeep Wrangler (JK) in the 70th and 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, in 2-door and Unlimited 4-door form.
The list does not include the rear position, the JL or TJ Wrangler, or any CJ or YJ. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This front shock is sized for a 3 to 4 inch lift, so check the lift height on your JK before ordering. The shock boot is an optional separate part, and it is not included with the shock.
What’s included
One front nitrogen stabilized twin tube shock. Not included: the optional shock boot.










