Select your vehicle
-13%

Trail Master Nitrogen Gas Twin Tube Shock Absorber – TM73265006

Trail Master

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear nitrogen twin tube shock for Jeep Wrangler JK and Cherokee XJ
  • Designed for a 3 to 4 inch lift on JK and 4.5 inch on XJ
  • 10-stage velocity sensitive valving
  • 5/8 inch chrome hardened piston rod; shock boot a separate part

Description

Overview

The Trail Master nitrogen gas twin tube shock absorber (part number TM73265006) is a rear shock for 2007–2018 Jeep Wrangler JK models and 1984–1990 Jeep Cherokee XJ models. It is designed for a 3 to 4 inch lift on the JK and a 4.5 inch lift on the XJ.

The shock is nitrogen stabilized and uses 10-stage velocity sensitive valving. The piston rod is 5/8 inch and chrome hardened, and an optional shock boot is available as a separate part rather than an included item.

This rear shock covers two platforms with different lift heights: 3 to 4 inches on the JK and 4.5 inches on the XJ. The XJ and JK fitments are listed separately, so confirm the platform and lift height on your vehicle before ordering.

Key features

  • Rear position for JK Wranglers and XJ Cherokees
  • Twin tube nitrogen stabilized design
  • 10-stage velocity sensitive valving
  • 5/8 inch chrome hardened piston rod
  • Designed for a 3 to 4 inch JK lift and 4.5 inch XJ lift
  • Nitrogen gas charge

Matching the shock to your lift

A rear shock works against the spring load and the axle movement that comes with off-road articulation. The XJ and JK use different lift settings, so the damping and length for one platform may not suit the other. Twin tube nitrogen construction keeps the gas charge separate from the working oil, which helps the damper keep a steady response as temperatures climb.

Before you buy, measure your current ride height and note whether your rear end sits level. A taller or shorter rear end changes the stroke a shock is asked to deliver, so the lift range matters. If your build includes a boot, count it as an extra part to buy. Rear shocks are normally replaced in pairs to keep the rear axle controlled evenly.

  • Compare rear ride height on both sides before ordering
  • Check the upper and lower mounts for cracked rubber
  • Plan for new hardware if the old bolts are rusted

Specifications

Brand Trail Master
Part number TM73265006
Shock series Nitrogen gas twin tube
Location Rear
Shock type Twin tube, nitrogen stabilized
Valving 10-stage velocity sensitive
Piston rod 5/8 inch chrome hardened
Lift range 3 to 4 in on JK; 4.5 in on XJ
Shock boot Optional, separate part
Fitment Direct fit

Vehicle fitment

This rear shock fits the 1984–1990 Jeep Cherokee (XJ) in the Base, Chief, Laredo, Limited, Pioneer and Sport trims, and the 2007–2018 Jeep Wrangler (JK) in the 70th and 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, in 2-door and Unlimited 4-door form.

The list does not include the front position, the TJ or LJ Wrangler, or the Grand Cherokee. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The lift height sets the sizing, so use the 3 to 4 inch range for a JK and the 4.5 inch setting for an XJ. The shock boot is an optional separate part, so plan for it if your setup uses one.

What’s included

One rear nitrogen stabilized twin tube shock. Not included: the optional shock boot.

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1984–1990Base, Chief, Laredo, Limited, Pioneer, Sport
Jeep Wrangler (JK)2007–201870th Anniversary (2-Door), 75th Anniversary (2-Door), Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 70th Anniversary (4-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door), Unlimited X (4-Door), X (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does this rear shock fit both a JK and a Cherokee XJ?

Yes. The TM73265006 fits the rear position on 2007–2018 Jeep Wrangler JK models and 1984–1990 Jeep Cherokee XJ models, with a different lift range for each vehicle. Confirm your trim and lift height before ordering.

What lift height does the XJ use?

The XJ uses a 4.5 inch lift setting, and the JK uses a 3 to 4 inch lift setting. Match the shock to the lift on your vehicle before installing. Confirm the platform before ordering so the correct range is used.

Is a shock boot included?

No. The shock boot is an optional separate part, so it is not included with this nitrogen stabilized rear shock. Obtain one separately if your setup uses a boot.

Can I replace only one rear shock?

It is better to replace rear shocks in pairs. A new shock beside a worn one can pull the rear end toward one side and change how the axle responds to bumps and braking. A matched pair keeps the ride consistent from left to right.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon