Select your vehicle

Trail Master Cellular Gas Twin Tube Shock Absorber – TM72215007

Trail Master

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front twin tube shock for the Jeep XJ and TJ
  • Designed for a 1.5 to 2 inch lift
  • Cellular gas design with a 5/8 inch chrome hardened piston
  • Gas charged; the shock boot is a separate part

Description

Overview

The Trail Master cellular gas twin tube shock absorber (part number TM72215007) is a gas-charged twin tube unit for the front position on Jeep Cherokee XJ and Wrangler TJ models. It is part of the Twintube series and is designed for a 1.5 to 2 inch suspension lift.

Trail Master says its cellular gas design reduces aeration and foaming inside the shock, which helps the damping stay consistent. The unit has a 5/8 inch chrome hardened piston. The shock boot is not included and is a separate part.

This front shock fits two Jeep platforms, the Cherokee XJ and the Wrangler TJ, so both the platform and the lift height need checking. Measure the lift on your vehicle first, since this shock is designed for a 1.5 to 2 inch range.

Key features

  • Front position for XJ and TJ Jeeps
  • Twin tube design
  • Cellular gas reduces aeration and foaming
  • 5/8 inch chrome hardened piston
  • Gas charged
  • Designed for a 1.5 to 2 inch lift

Gas-charged shock basics

A gas-charged twin tube shock keeps its damping more consistent than an uncharged unit when the oil heats up on rough roads. Cellular gas designs aim to limit foaming in the oil, which helps the shock resist fade on long trips or trail sections that run for a while.

Front shocks on older Jeeps often work alongside worn bushings and tired steering parts, so inspect the mounts and bushings when you fit a new shock. Replacing shocks in pairs on the same axle helps keep the ride even from side to side.

  • Check the lift height before buying
  • Inspect upper and lower mounts for wear
  • Replace shocks in pairs on the same axle
  • Keep the shock boot in place if your setup uses one

Specifications

Brand Trail Master
Part number TM72215007
Shock series Twin tube series
Location Front
Shock type Twin tube
Charge Gas
Piston 5/8 inch chrome hardened
Lift range 1.5 to 2 in
Shock boot Not included (separate part)
Fitment Direct fit

Vehicle fitment

It fits the 1984–1990 Jeep Cherokee (XJ) in the Base, Chief, Laredo, Limited, Pioneer and Sport trims, the 1997–2006 Jeep Wrangler (TJ), and the 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon. Cherokee XJ years after 1990, Wrangler YJ or JK and any rear position fall outside this fitment. Confirm fit for your vehicle’s year, model and trim before ordering.

The list does not include the Cherokee XJ years after 1990, any Wrangler YJ or JK, or any rear position. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

This front shock is sized for a 1.5 to 2 inch lift, so check the lift height on your XJ or TJ before ordering. Because the shock boot is a separate part, plan for it before the install if your setup uses one.

What’s included

One front twin tube gas shock. Not included: the shock boot.

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1984–1990Base, Chief, Laredo, Limited, Pioneer, Sport
Jeep Wrangler (LJ)2004–2006Unlimited, Unlimited Rubicon
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the TM72215007 fit a rear TJ position?

No. It is a front shock, and fitment covers the front position on XJ and TJ models. A rear TJ position needs a different shock, since rear shocks are sold as separate parts.

What lift height does this shock need?

The shock is designed for a 1.5 to 2 inch lift, so check your suspension height before ordering. A lift outside that range is not covered for this shock.

Is a shock boot included with the Trail Master front shock?

No. The shock boot is a separate part and is not included, so obtain one separately if your setup uses a boot. The shock is the only item in this kit.

How can I tell if a front shock is worn?

Look for oil on the body, a bouncy or floating ride, and uneven tire wear. Noise at the mounts after bumps can also point to worn bushings. Compare the left and right shocks, since a single worn unit often changes handling on that side.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon