Select your vehicle
-13%

Trail Master Nitrogen Gas Twin Tube Shock Absorber – TM73235002

Trail Master

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear nitrogen gas twin tube shock for Jeep Wrangler TJ and LJ
  • Designed for a 4 inch lift
  • 10-stage velocity sensitive valving
  • 5/8 inch chrome hardened piston rod; shock boot a separate part

Description

Overview

The Trail Master nitrogen gas twin tube shock absorber (part number TM73235002) is a rear shock for the 1997–2006 Jeep Wrangler (TJ) and the 2004–2006 Jeep Wrangler (LJ) Unlimited. It is designed for a 4 inch suspension lift, which places it at the higher end of the TJ and LJ lift range.

The shock is nitrogen stabilized and uses 10-stage velocity sensitive valving. The piston rod is 5/8 inch and chrome hardened, and an optional shock boot is available as a separate part.

This rear shock fits the LJ Unlimited and Unlimited Rubicon and the TJ trims in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X. The 4 inch lift range is the sizing point, so confirm your lift before ordering. A lower lift calls for the shorter-lift Trail Master version.

Key features

  • Rear position for TJ and LJ Wranglers
  • Twin tube nitrogen stabilized design
  • 10-stage velocity sensitive valving
  • 5/8 inch chrome hardened piston rod
  • Designed for a 4 inch lift
  • Nitrogen gas charge

Lift height and rear shock sizing

Lift height is the main factor when sizing a rear shock for a TJ or LJ. A shock designed for a 4 inch lift extends and compresses through a range that matches the rear suspension at that height, so it works best when the lift is correct. A mismatched shock length can limit travel, cause bottoming or leave the rear end feeling loose.

Before buying, measure the rear suspension height on the Jeep and compare it with the lift the shock is designed for. Taller bumpers, heavier loads and larger tires all add stress to rear damping, so check the rod, seals and mounts whenever they change. Replacing rear shocks as a pair keeps both sides balanced over rough ground.

  • Measure rear height before buying
  • Consider load and bumper weight
  • Check mounts when tires are upsized

Specifications

Brand Trail Master
Part number TM73235002
Shock series Nitrogen gas twin tube
Location Rear
Shock type Twin tube, nitrogen stabilized
Valving 10-stage velocity sensitive
Piston rod 5/8 inch chrome hardened
Lift range 4 in
Shock boot Optional, separate part
Fitment Direct fit

Vehicle fitment

It fits the 2004–2006 Jeep Wrangler (LJ) in the Unlimited and Unlimited Rubicon trims, and the 1997–2006 Jeep Wrangler (TJ) in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.

The list does not include the front position, the YJ or JK Wrangler, or any Cherokee. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The shock is designed for a 4 inch lift, so it is not sized for a lower lift height. Check the lift on your TJ or LJ before ordering, since lift height is the main sizing factor for this rear shock.

What’s included

One rear nitrogen stabilized twin tube shock. Not included: the optional shock boot.

Fitment

VehicleYearsTrims
Jeep Wrangler (LJ)2004–2006Unlimited, Unlimited Rubicon
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will this 4-inch rear shock fit a TJ with a lift below 4 inches?

Trail Master designs this shock for a 4 inch lift, so a lower lift is outside its stated range. The shorter-lift version for the TJ and LJ is a separate part, TM73215008, and is the listed option for lower lifts.

Is this shock for the front or rear?

Rear. The TM73235002 fits the rear position on TJ and LJ Wranglers, and the front position is a separate part sold on its own.

Is a shock boot included?

No. The shock boot is an optional separate part, so it is not included with this nitrogen stabilized shock. Obtain one separately if your setup uses a boot.

How can I tell if a rear shock is worn?

Look for fluid leaks along the shock body, rebound that keeps bouncing after a dip, or noise from the bushings. Check the mounts for play as well. Replacing a worn rear shock in pairs keeps the Jeep balanced side to side.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon