Overview
The Tuff Country SX6000 shock absorber, part number T/C62267, is a twin-tube, cellular gas, hydraulic shock for 1986–1995 Toyota 4Runner and 1986–1995 Toyota Pickup models and 1995–2004 Toyota Tacoma trucks. It is sized for vehicles with no lift or drop, and two units are needed per vehicle.
The SX6000 uses multi-stage valving to give a smooth, controlled ride on paved roads and on trails. The shock is built with a cellular gas charge, and it has polyurethane bushings. Tuff Country recommends these shocks for mid-size and mini applications. A multi-fit hardware pack is included with the shock.
Key features
- Twin-tube design with a hydraulic cellular gas charge
- Multi-stage valving for a smooth, controlled ride
- Polyurethane bushings
- Multi-fit hardware pack included
- Recommended for mid-size and mini applications
Shock replacement basics
A shock controls how quickly the spring compresses and rebounds, which keeps the tires in contact with the ground on uneven surfaces. A worn shock can cause bouncing after bumps, a nose-dive under braking, and cupped tire wear. Oil leaking down the body is a clear sign that the internal seals have failed.
Shocks are usually replaced in pairs on the same axle, because a new shock beside a worn one gives uneven damping that can pull the truck on hard braking. Inspect the eyelet bushings and mounting hardware when replacing them, and clean the mounting surfaces so the new shock seats properly. Recheck the fasteners after the first few drives.
- Replace shocks in pairs on the same axle
- Check for oil leaking down the shock body
- Inspect eyelet bushings for cracking
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | T/C62267 |
| Product line | SX6000 |
| Shock type | Twin-tube, hydraulic, cellular gas |
| Position | Rear |
| Lift height | 0 in. lift or drop |
| Valving | Multi-stage |
| Bushings | Polyurethane |
| Quantity required | 2 |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1986–1995 Toyota 4Runner in its DLX and SR5 models, the 1986–1995 Toyota Pickup across its Base, Base Turbo, DLX, SR5 and SR5 Turbo models, and the 1995–2004 Toyota Tacoma in its Base, DLX, Limited and SR5 models. It is sized for a 0 inch lift or drop.
The list covers the 1986–1995 4Runner and Pickup and the 1995–2004 Tacoma only, so the 1996 and newer 4Runner and the later Tacoma and Tundra models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Two shocks are required for each vehicle. Check the mounting points and the bushings against the originals before installation.
What’s included
Each shock comes with the multi-fit hardware pack. Two shocks are required per vehicle.









