Select your vehicle

Trail Master Cellular Gas Twin Tube Shock Absorber – TM72245004

Trail Master

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear shock for Jeep Grand Cherokee ZJ, plus front and rear CJ positions
  • Designed for a 3.5 to 4 inch lift
  • Cellular gas design with a 5/8 inch chrome hardened piston
  • Gas charged; the shock boot is a separate part

Description

Overview

The Trail Master cellular gas twin tube shock absorber (part number TM72245004) is a rear shock for the 1993–1998 Jeep Grand Cherokee (ZJ), and it is also used at the front and rear of CJ models. It is designed for a 3.5 to 4 inch suspension lift.

The shock uses a cellular gas design, which Trail Master says reduces aeration and foaming inside the unit. It has a 5/8 inch chrome hardened piston, and the shock boot is a separate part, so it is not included with the shock.

The Grand Cherokee ZJ and the CJ use the same 3.5 to 4 inch lift range for this shock, but the positions differ: the ZJ is a rear application only, while the CJ has both front and rear positions. Match the position to your vehicle, and confirm the lift height before ordering because the range is narrow.

Key features

  • Rear position for the Grand Cherokee ZJ
  • Front and rear positions for the CJ
  • Twin tube design
  • Cellular gas reduces aeration and foaming
  • 5/8 inch chrome hardened piston
  • Designed for a 3.5 to 4 inch lift

Choosing the right setup

Twin tube shocks are a common choice for older Jeep platforms with leaf or coil suspension, where the shock controls body motion as the suspension cycles. On a CJ or ZJ, the shock position and lift height both affect how the vehicle rides, so the setup should be matched before the shock is installed.

Shock mounts, bushings and the springs are often inspected at the same time, since worn bushings can change shock angle and reduce damping. Replacing a shock on an older vehicle is also a good moment to check the steering linkage and the brake lines near the mounting points.

  • Confirm the position (front or rear) before ordering.
  • Measure the lift height on the vehicle, not from memory.
  • Inspect shock mounts and bushings when replacing shocks.

Specifications

Brand Trail Master
Part number TM72245004
Shock series Twin tube series
Location Front and rear (CJ), rear (ZJ)
Shock type Twin tube
Charge Gas
Piston 5/8 inch chrome hardened
Lift range 3.5 to 4 in
Shock boot Not included (separate part)
Fitment Direct fit

Vehicle fitment

This shock fits the 1976–1983 Jeep CJ5 in the Base, Golden Eagle, Laredo, Limited and Renegade trims, the 1976–1986 Jeep CJ7 in the Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, and the 1993–1998 Jeep Grand Cherokee (ZJ) in the 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trims. It does not fit the WJ Grand Cherokee, the YJ or TJ Wrangler, or any Cherokee XJ. Confirm your vehicle’s year, model and trim before ordering.

The list does not include the WJ Grand Cherokee, the YJ or TJ Wrangler, or any Cherokee XJ. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The shock is designed for a 3.5 to 4 inch lift, so confirm the lift height on your CJ or ZJ before installing. The shock boot is a separate part and is not included.

What’s included

One cellular gas twin tube shock. Not included: the shock boot.

Fitment

VehicleYearsTrims
Jeep CJ51976–1983Base, Golden Eagle, Laredo, Limited, Renegade
Jeep CJ71976–1986Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade
Jeep Grand Cherokee (ZJ)1993–19985.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the TM72245004 fit a front position on a Grand Cherokee ZJ?

No. This shock is made for the rear position on the ZJ and for both front and rear positions on the CJ. A ZJ front position is not part of the fitment.

Does this shock work on a lift below 3.5 inches?

The product is designed for a 3.5 to 4 inch lift, so a lower lift falls outside the stated range. Check your suspension height before ordering, and confirm the position you need for your vehicle.

Is a shock boot included with the TM72245004?

No. The shock boot is a separate part and is not included in this kit. Obtain one separately if your setup uses a boot.

Can this shock be used with a different lift than listed?

It is made for the 3.5 to 4 inch range. A lower or higher lift changes shock length and travel, so the damping may not match the suspension. Measure your lift and confirm the shock matches it before installing.

Should the shocks be replaced in pairs on a CJ or ZJ?

Replacing both shocks on the same axle is generally recommended. Mismatched shocks can make the vehicle handle unevenly and pull to one side during braking or on rough ground.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon