Overview
The Bilstein BIL22-282743 is a rear left B6 Series suspension strut for the 2008 to 2013 Toyota Highlander. It fits the Base, Limited, Plus, SE and Sport models and is made for 2WD vehicles.
Both the top and bottom mounts are OEM, so the strut uses the factory mounting points. It is gas charged with a monotube design, a black paint finish and a direct-fit application. The B6 is tuned for each specific application.
Key features
- Rear left position
- OEM top mount and OEM bottom mount
- Gas-charged monotube design
- OEM body diameter
- Black paint finish
- Direct-fit application
Keeping the rear end settled
The rear struts control how the back of the vehicle moves over bumps, under braking and through turns. A rear unit works with the springs and the axle to keep the rear tires in contact with the road, so wear on one side changes how the whole rear end feels. Because a rear strut is a single corner, its condition is best judged alongside the other rear unit.
Check the mounts and bushings during a rear strut replacement, since a loose mount can make a new strut feel noisy. Use a securely supported vehicle, and recheck the hardware once the vehicle has been driven for a short time. Keep an eye on the boot area and the strut body for oil or dirt that suggests a seal has failed.
- Inspect mounts and bushings during replacement
- Look for oil on the strut body
- Recheck hardware after the first drives
- Compare the other rear strut’s condition
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL22-282743 |
| Series | B6 Series |
| Position | Rear left |
| Drivetrain | 2WD models |
| Shock type | Monotube |
| Charge | Gas charged |
| Top mount | OEM |
| Bottom mount | OEM |
| Body diameter | OEM |
| Finish | Black paint |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2008–2013 Toyota Highlander in Base, Limited, Plus, SE and Sport models.
It is made for 2WD models, so confirm the drivetrain before ordering. It covers only 2008 to 2013 Highlander models, so later years are not included.
Installation notes
Confirm the rear left position and the 2WD drivetrain before fitting, because the right rear strut is a separate part. Work on a securely supported vehicle.
What’s included
One rear left strut assembly. Check the package contents for mounting hardware and any spring against your installation before starting.












