Overview
The Tuff Country SX8000 shock absorber, part number 61236, is a front nitro gas shock for Jeep Cherokee (XJ), Grand Cherokee (ZJ) and Wrangler (TJ and LJ) models with a 3.5 in. lift, and it includes a multi-fit hardware pack.
Tuff Country says its EZ-Ride SX8000 Nitro Gas shocks are recommended for all full-size applications, and that the nitrogen gas pressure reduces fading and gives quicker shock response. Two shocks are required.
The SX8000 is a full-size application shock. It suits the vehicles above when they have a 3.5 in. lift. Two shocks are needed, so fit them as a pair on the front axle.
The multi-fit hardware pack included with the shock is intended to suit several applications, so check the mounting points on your vehicle before installation.
Key features
- SX8000 Nitro Gas shock absorber
- Front position
- For vehicles with a 3.5 in. lift
- Nitrogen gas pressure reduces fade and gives quicker shock response
- Includes a multi-fit hardware pack
- Two required
Shock pairs and wear
Shocks control how quickly the springs settle after a bump, so a worn pair can make the front feel floaty, bouncy or unsettled on washboard roads. On a lifted Jeep, the shock also works at a different angle than stock, which increases side loading on the piston rod. Mounting the shocks square and keeping the bushings free of debris helps them last.
Shocks are usually replaced in pairs so both sides damp the same way. When inspecting, look for oil leaking from the body, dents in the reservoir tube, or bushings that have cracked. Check the bump stops too, since worn stops can change how the shock works near the end of its travel.
- Replace shocks in pairs
- Look for oil leaks on the body
- Check bump stops and bushings
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 61236 |
| Product type | Shock absorber |
| Series | SX8000 (EZ-Ride Nitro Gas) |
| Position | Front |
| Lift height | For 3.5 in. lift |
| Hardware | Multi-fit hardware pack included |
| Quantity needed | Two required |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Tuff Country 61236 covers the 1987–2001 Jeep Cherokee (XJ), the 1993–1998 Jeep Grand Cherokee (ZJ), the 2004–2006 Jeep Wrangler (LJ) and the 1997–2006 Jeep Wrangler (TJ), in the trims shown on the stored fitment tab.
It is made for a 3.5 in. lift and is not a match for other lift heights. It does not fit other Jeep models or generations. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Suspension components affect steering, braking and handling, so professional installation is recommended. Support the vehicle on jack stands rather than a jack alone, tighten every fastener to the specified torque, and re-check it after the first miles of driving. Have the alignment checked after any suspension work, and check local rules on vehicle height and equipment.
What’s included
- One SX8000 front shock absorber
- Multi-fit hardware pack
Not included: a second shock, since two are required.
