Select your vehicle

Trail Master Cellular Gas Twin Tube Shock Absorber – TM72235002

Trail Master

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear twin tube shock for Jeep Wrangler JK, 2- and 4-door
  • Designed for a 1.75 inch lift
  • Cellular gas design with a 5/8 inch chrome hardened piston
  • Gas charged; the shock boot is a separate part

Description

Overview

The Trail Master cellular gas twin tube shock absorber (part number TM72235002) is a rear shock for 2007–2018 Jeep Wrangler JK models, in both 2-door and 4-door form. It is designed for a 1.75 inch suspension lift.

The cellular gas design reduces aeration and foaming in the shock. The unit has a 5/8 inch chrome hardened piston rod. The shock boot is a separate part and is not included with the shock.

This rear shock fits 2-door and Unlimited 4-door JK Wranglers in the Rubicon, Sahara, Sport and X trims. The rear position is separate from the front JK shock, so confirm you need a rear unit before ordering. Check the 1.75 inch lift on your rear suspension before ordering, since lift height is the main sizing point for this part.

Key features

  • Rear position for JK Wranglers
  • Twin tube design
  • Cellular gas reduces aeration and foaming
  • 5/8 inch chrome hardened piston rod
  • Gas charged
  • Designed for a 1.75 inch lift

On the trail

A rear shock controls how the axle rebounds and compresses over washboard, ruts and off-camber ground. On a JK, the rear shocks carry a large share of the work when the rear axle articulates, so a unit that keeps damping consistent from trail to trail helps keep the rear end settled.

Gas-charged twin tube shocks are often chosen for their steady response over repeated bumps. Pressurized gas helps limit fade when the shock heats up during long descents or sustained trail use, which is a practical benefit on longer runs.

  • Check shock mounting bolts and bushings after the first few trail runs.
  • Inspect for oil seepage along the shaft, which can signal internal wear.
  • Replace rear shocks in pairs so both sides damp the same way.

Specifications

Brand Trail Master
Part number TM72235002
Shock series Twin tube series
Location Rear
Shock type Twin tube
Charge Gas
Piston 5/8 inch chrome hardened
Lift range 1.75 in
Shock boot Not included (separate part)
Fitment Direct fit

Vehicle fitment

This rear shock fits the 2007–2018 Jeep Wrangler (JK) in the 70th and 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, in 2-door and Unlimited 4-door form. It does not fit the front position, the JL or TJ Wrangler, or the Gladiator. Confirm your vehicle’s year, model and trim before ordering.

The list does not include the front position, the JL or TJ Wrangler, or the Gladiator. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The rear shock is sized for a 1.75 inch lift, so confirm your rear lift before ordering. Because the shock boot is a separate part, it must be obtained on its own if you want one.

What’s included

One rear twin tube gas shock. Not included: the shock boot.

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201870th Anniversary (2-Door), 75th Anniversary (2-Door), Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 70th Anniversary (4-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door), Unlimited X (4-Door), X (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is this the rear shock for a 2012 Jeep Wrangler JK?

Yes. It fits 2007 through 2018 JK Wranglers in the rear position, so a 2012 model falls inside the year range. Confirm your trim and lift height before ordering, since the shock is designed for a 1.75 inch lift.

Is a shock boot included with the rear shock?

No. The shock boot is a separate part and is not included in this kit. Obtain a boot separately if your setup uses one.

What lift height is this rear shock made for?

It is designed for a 1.75 inch suspension lift, so check the lift height before installing. The front JK shock, TM72235001, is designed for the same lift range.

How can I tell if the rear shocks are worn?

Look for oil on the shock body, a clunking or bouncing ride, or uneven tire wear. Loose mounting hardware and a rear end that keeps moving after bumps can also point to worn shocks that need inspection.

Should rear shocks be replaced when the suspension is lifted?

Often yes. A lift changes shock length and angle, so a shock sized for a different lift may not control the axle well. Confirm the lift height matches the shock before installing it on a lifted JK.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon