Select your vehicle
-13%

Trail Master Nitrogen Gas Twin Tube Shock Absorber – TM73215007

Trail Master

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front nitrogen gas twin tube shock for the Jeep Grand Cherokee ZJ
  • Designed for a 2 inch lift
  • 10-stage velocity sensitive valving
  • 5/8 inch chrome hardened piston rod; shock boot a separate part

Description

Overview

The Trail Master nitrogen gas twin tube shock absorber (part number TM73215007) is a front shock for the 1993–1998 Jeep Grand Cherokee (ZJ). It is designed for a 2 inch suspension lift and is for the front position.

The shock is nitrogen stabilized, and its valving is 10-stage velocity sensitive. The piston rod is 5/8 inch and chrome hardened. A shock boot is available as a separate part, so it is not included with the shock.

This is a ZJ-specific part, so confirm the 2 inch lift and the nitrogen stabilized design match your setup before ordering. The 10-stage velocity sensitive valving sets how the damping responds.

Key features

  • Front position for the Grand Cherokee ZJ
  • Twin tube nitrogen stabilized design
  • 10-stage velocity sensitive valving
  • 5/8 inch chrome hardened piston rod
  • Designed for a 2 inch lift
  • Nitrogen gas charge

Choosing shocks for a lifted ZJ

A front shock does more than control bounce. On a Grand Cherokee ZJ it works with the coil springs, control arms and steering to keep the tires in contact with the ground over washboard and ruts. When a lift raises the body, the shock’s length and travel change, so lift height and shock length should be matched before the install. Nitrogen charged twin tube designs resist foaming under heavy use, which helps damping stay consistent on long descents.

Valving decides how quickly the shock resists movement at different speeds. Velocity sensitive valving responds to how fast the suspension moves, so it can feel firmer on sharp hits and smoother at low speed. Worn bushings, leaking seals and a sagging front end are signs the shock has reached the end of its service life. Replacing shocks in pairs keeps handling even from side to side.

  • Check bushings and mounts when replacing shocks
  • Inspect the shaft and body for oil leaks
  • Re-check bolt torque after the first few drives

Specifications

Brand Trail Master
Part number TM73215007
Shock series Nitrogen gas twin tube
Location Front
Shock type Twin tube, nitrogen stabilized
Valving 10-stage velocity sensitive
Piston rod 5/8 inch chrome hardened
Lift range 2 in
Shock boot Optional, separate part
Fitment Direct fit

Vehicle fitment

It is for the 1993–1998 Jeep Grand Cherokee (ZJ) in the 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trims. It does not fit the WJ Grand Cherokee or any other Jeep model, and it does not cover the rear position. Confirm your vehicle’s year, model and trim before ordering.

The list does not include the WJ Grand Cherokee or any other Jeep model, and it does not cover the rear position. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

This front shock is designed for a 2 inch lift, so check your suspension height before ordering. The shock boot is an optional separate part, so decide whether you need one before the install.

What’s included

One front nitrogen stabilized twin tube shock. Not included: the optional shock boot.

Fitment

VehicleYearsTrims
Jeep Grand Cherokee (ZJ)1993–19985.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the TM73215007 fit a Grand Cherokee WJ?

No. It fits only the 1993–1998 Grand Cherokee ZJ. WJ models from 1999 to 2004 are not covered, so confirm your year, model and trim before ordering.

What valving does this shock use?

It uses 10-stage velocity sensitive valving. The piston rod is 5/8 inch and chrome hardened, and the shock is designed for a 2 inch lift on the front of the ZJ.

Is a shock boot included?

No. The shock boot is an optional separate part, so a boot is not part of this shock. Obtain one separately if your setup calls for it.

Should front shocks be replaced in pairs?

Yes, in most cases. Replacing both front shocks together keeps damping and ride height even from side to side. Mixing a new shock with a worn one can pull the vehicle toward the older side under braking and in turns.

How can you tell a front shock is worn?

Look for oil on the shock body, a front end that keeps bouncing after a bump, or uneven tire wear along the edges. Noises from the mounts and a nose-dive under braking are also common signs. Inspect the shock and its bushings when these show up.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon