Racks
Showing 169–180 of 319 resultsSorted by popularity
-
Rack Accessories
Rhino-Rack Pioneer 48″ Roof Rack Roller – 43130
- Rhino-Rack USA Pioneer 48-inch roof rack roller, part number 43130
- Set at the rear of a Platform or Elevation tray for loading
- Roller spans close to the tray width for ladders and timber
- Suits new trays and older trays through a retro-fit
SKU: RHO43130 -
Rack Accessories
Rhino-Rack Pioneer 42″ Roof Rack Roller – 43129
- Rhino-Rack USA Pioneer 42-inch roof rack roller, part number 43129
- Mounts to the rear of a Platform or Elevation tray
- Helps load ladders, sheets of timber and similar items
- Can be fitted to new trays or retro-fitted to older trays
SKU: RHO43129 -
-
-
Watersports Racks and Carriers
Rhino-Rack Nautic Kayak Carrier – 581
- Rear loading kayak carrier with cradles that lock to the crossbars
- Two front santoprene pads and two spring-loaded rear pads covered in felt
- Hidden lockable coverplate helps reduce the risk of theft
- Fits any current roof rack system with a bar channel
SKU: RHO581 -
Mount Kits and Hardware
Rhino-Rack Multi Purpose Holder – RMPHU
- Rhino-Rack multi purpose holder, model RMPHU, part number RHORMPHU
- Holds fishing rods, ski poles, kayak paddles and similar long items
- Glass-reinforced nylon with santoprene rubber padding
- Fits lengthways or sideways, or mounts directly to Pioneer planks
SKU: RHORMPHU -
-
-
Mount Kits and Hardware
Rhino-Rack Leg Height Spacers – PLHS2
- Rhino-Rack Pioneer leg height spacers, model PLHS2, part number RHOPLHS2
- Fits between a RLCP, RLTF/P or RL leg and a Pioneer platform or tray
- Lets the legs slide out approximately 75mm wider overall
- Universal fit, not tied to one vehicle
SKU: RHOPLHS2 -
Mount Kits and Hardware
Rhino-Rack Leg Height Spacers – LHS-A1PAIR
- Rhino-Rack leg height spacers, model LHS-A1PAIR, part number RHOLHS-A1PAIR
- Placed between the leg unit and the roof rack crossbar
- Raises crossbars until all of them sit at an even height
- Universal fit, so check the leg units and crossbars
SKU: RHOLHS-A1PAIR -
Watersports Racks and Carriers
Rhino-Rack Kayak/Ski Bow Strap Bonnet Tie Down – RBAS1
- Rhino-Rack RBAS1 kayak and ski bow strap bonnet tie down, part number RHORBAS1
- Includes a 3.6m tie down strap with an anchor point strap
- Wraps around kayaks or objects with no front or rear tie-off point
- Used on the bow or stern, bonnet or boot
- Universal fit, so the load and tie-off points matter more than the vehicle
SKU: RHORBAS1
Types of racks
Racks come in a few basic designs, and the right one depends on what you carry. Load bar systems are two or more crossbars that span the roof and accept accessories such as bike mounts, kayak holders and cargo boxes. Basket racks add a rail-edged tray that holds loose gear, fuel cans and spare tires. Platform racks use a flat, slatted surface for tents, boards and awnings. Truck bed racks mount over the bed rails and raise the load above a cap or topper.
Fitment and mounting
Mounting method is the first thing to confirm. Some racks bolt to factory mounting points, some clamp to rain gutters, and others sit on a vehicle-specific rail or track system. The listings show whether a rack is direct fit for a particular vehicle or universal, in which case a separate mount kit or footpack is usually required. Always confirm fitment for your exact year, make, model and roof style, including whether you have a sunroof or a hardtop.
Understanding load ratings
Roof racks list two different limits. The dynamic rating is how much the rack can carry while the vehicle is moving. The static rating is higher and applies to a parked vehicle, for example with a rooftop tent. Your vehicle's roof also has its own maximum load listed in the owner's manual, and that figure is the real ceiling regardless of what the rack can handle. Keep in mind that the weight of the rack counts against it.
- Check the rack's dynamic and static ratings.
- Check the vehicle manufacturer's roof load limit.
- Subtract the rack and accessory weight from the usable total.
Practical considerations
A heavy roof load raises the center of gravity, so expect more body roll, longer braking distances and extra sensitivity to crosswinds. Distribute weight evenly, keep heavy items low and centered, and secure everything with rated straps. Low-profile designs reduce wind noise and fuel penalty. Check clearances for garages and overhead obstacles after installation.
Installation notes
Follow the manufacturer's torque specifications and re-check fasteners after the first few trips, since vibration can loosen hardware. Rack accessories are usually sold separately, so list out what you intend to carry before choosing a base system.
Before choosing, write down what you plan to carry and how often. A rack used daily for bikes has different needs than one that holds recovery boards and fuel on a few trips a year. Check the crossbar spacing against the accessories you want, because some carriers require a minimum or maximum distance between bars. Look for locking hardware if you leave gear on the roof unattended, and note that fairings or deflectors reduce wind noise on some bar systems. After installing, listen for whistles or rattles on the first drive, then adjust. Clean the rack periodically, especially after beach or winter driving, and touch up scratches in the coating to slow corrosion. Keep an eye on overhead clearance in parking structures and at drive-throughs, since a loaded rack adds real height.
Popular Racks brands
- Rhino-Rack USA (169)
- Thule (63)
- BajaRack (19)
- ARB 4x4 Accessories (13)
- Go Rhino (9)
- Smittybilt (9)
- TruXedo (7)
- Garvin Industries (5)
- TeraFlex (3)
- KC HiLites (3)
- Rightline Gear (2)
- Dee-Zee (2)
Shop Racks by type
- Mount Kits and Hardware (134)
- Cargo and Basket Racks (40)
- Load Bar Racks (33)
- Bike Racks and Carriers (28)
- Base and Platform Racks (25)
- Rack Accessories (17)
- Watersports Racks and Carriers (11)
- Wintersport Racks and Carriers (9)
- Rooftop Cargo Carriers (9)
- Contractor Racks (8)
- Cage Racks (4)
- Fish & Game Racks and Carriers (1)
Racks FAQ
What is the difference between a basket rack and load bars?
A basket rack is a rimmed tray that holds loose cargo directly. Load bars are crossbars that accept clamp-on accessories such as bike carriers, boxes and kayak mounts. Choose based on whether you carry bulky loose gear or specific equipment.
How much weight can I put on my roof rack?
The limit is the lower of the rack's dynamic rating and your vehicle's roof load limit in the owner's manual. Subtract the weight of the rack itself. Static ratings apply only when parked, such as with a rooftop tent.
Will a universal rack fit my vehicle?
Universal racks usually need a vehicle-specific mount kit or footpack to attach securely. Confirm fitment for your exact year, make and model, and check roof features like sunroofs, rails or a factory track system.
Do roof racks affect fuel economy?
Yes. A rack and cargo increase aerodynamic drag, which can reduce fuel economy, especially at highway speed. Low-profile bars and removing the rack when it is not needed help limit the effect.











