Fuel and Water Cans
Showing 25–36 of 53 resultsSorted by popularity
-
Fuel and Water Cans
Artec Duece Quart Crate – QC0021
- Artec Industries QC0021 Duece Quart Crate, a 16 gauge steel holder for gallon bottles.
- Built for coolant, antifreeze, hydraulic fluid and gear oil in standard gallon bottles.
- Clip-in hinge and locking clamp for one-handed gallon retrieval.
- Hard-mounts with simple tools such as a drill.
- Universal fit; not for 5+ quart oil containers.
SKU: A/IQC0021 -
Fuel and Water Cans
Artec Fuel Cell Mount – FM0132
- Six-piece steel mount set for Artec FM0132, built for 32-gallon Pro Sport and Pro Sport II fuel cells
- Compatible with cell prefixes 270, 272, 273, 274, 280, 281, 282 and 283
- Two CNC cut 16 gauge tops and two 10 gauge side brackets and bases
- Bare steel finish that requires paint, powdercoat or plating; 1/4-inch hardware included
SKU: A/IFM0132 -
Fuel and Water Cans
Artec Fuel Cell Mount – FM0122
- Bare steel fuel cell mount for JAZ Pro Sport 22 gallon fuel cells
- Two tops, two side brackets and two bases, six pieces total
- Tops cut from 16 gauge cold roll steel, side brackets and bases 10 gauge
- 1/4 inch hardware included
- Not a vehicle part; fits Pro Sport and Pro Sport II cells with listed prefixes
SKU: A/IFM0122 -
-
-
-
What this category includes
Extended trips and remote trails call for carrying fuel and water beyond what the vehicle holds. The listings include plastic modular packs in capacities such as 1.75, 2, 3 and 4 gallons, steel jerry-style cans, Daystar Cam Can containers made for Jeeps, and mounting hardware such as backing plates, pack mounts, extensions and fuel cell mounts. Some packs are sold empty as storage or emergency kits.
Plastic packs versus steel cans
Modular plastic packs are designed to lock onto a mount and can be stacked. They are light and corrosion free, and approved versions carry EPA and CARB compliance notes. Steel cans, such as the military-style jerry can, are sturdy and common, and they use a locking lever and a spout that can be stored with the can. Both types should be rated for the liquid you carry, so use fuel-rated containers for gasoline and diesel and keep water in a separate container intended for it.
What to check
- Capacity and shape: a flat pack fits a tailgate or rack better than a tall can.
- Intended liquid: gasoline, diesel or water. Do not switch a container between fuel and drinking water.
- Spout and venting: a good spout and vent cap reduce spills.
- Mount compatibility: many listings say the mounting kit is sold separately, and each system has its own mounts.
- Material and finish: powder-coated steel, anodized aluminum or molded plastic.
Safe use
Fill cans outdoors, away from ignition sources, and avoid filling them while sitting in a truck bed with a plastic liner, where static can build up. Leave a little expansion room in the container, since heat expands fuel. Keep cans secured so they cannot shift or fall, ideally outside the passenger cabin, and tighten caps fully. Check local rules for transporting and storing fuel, and never exceed the weight capacity of your rack, hitch carrier or mount.
Capacity planning matters. Gasoline weighs roughly six pounds per gallon and water about eight, so a few containers add real weight to a rack, tailgate or rear bumper carrier. Check the weight rating of whatever you mount to, and keep heavy loads low and close to the vehicle center, which keeps handling more predictable. Mounting plates, brackets and straps should be tightened and rechecked since trail vibration loosens fasteners.
Think about convenience in the field. A well designed spout with a vent allows a smooth, fast pour without gurgling, and a backing plate, pack mount and extension let you build a modular setup that matches your vehicle. If you carry water, rinse and sanitize the container as the maker recommends, and store it out of direct sunlight to slow algae growth. Keep fuel containers away from the exhaust, and never fill them completely. Remember that rules for carrying fuel on roads and in campgrounds or parks vary, so check local requirements for your area.
Inspect gaskets and seals before each trip. Spout gaskets and cap seals harden with age and fuel exposure, and a worn gasket is the most common cause of a slow leak that smells in the cabin or stains a carrier. Keep a spare gasket and a funnel with your recovery kit, and wipe any spilled fuel off the container and the vehicle right away.
Fitment
Mounting parts are model specific, so check your vehicle fitment and the manufacturer's specifications before choosing a product below.
Popular Fuel and Water Cans brands
- RotoPAX (24)
- Daystar (9)
- Midwest Can Company (8)
- Artec Industries (5)
- Wavian (5)
- Rugged Ridge (1)
- RT Off-Road (1)
- Cliffride (1)
Fuel and Water Cans FAQ
Can I use a fuel can for water?
It is not recommended. Fuel residue can remain in a container and contaminate drinking water. Use separate, clearly marked containers, with fuel-rated cans for gasoline or diesel and food-safe containers for water.
Do RotoPAX packs include a mount?
Many listings state that the container is sold only, with the mounting kit sold separately. Check the product page for what is included, and confirm you have a compatible mount, spout and backing plate for your setup.
How should I carry extra fuel safely?
Use approved fuel containers, secure them so they cannot shift, and keep them outside the passenger cabin when possible. Leave expansion room, tighten caps fully, and follow local rules for transporting fuel.
What is the difference between plastic and steel fuel cans?
Plastic packs are lighter, will not rust and often work with modular mounts. Steel cans are very sturdy and heat tolerant. Either should be rated for the fuel carried, and the choice often comes down to mount type and preference.











