Overview
The RotoPAX RX-PM is a black powder coated pack mount that holds RotoPAX containers in place, and it is designed for quick mounting. It is not a vehicle part, so confirm the surface before bolting it on.
The mount works with the included base plate. The plate can also be removed so the mount bolts directly up through the bottom or down through the top.
Key features
- Black powder coated base
- Base plate included
- Option to remove the plate for direct mounting
- Designed for quick mounting by bolting.
Mounting surface checklist
A pack mount holds its load only when the surface under it is firm and well attached. Before drilling, confirm the panel is solid, the bolt holes will not crack thin material, and the area behind the panel is clear. Test the position by fitting the mount and checking that it does not flex when you press on it.
Choose bolts and washers that suit the thickness of the panel and the weight of the packs. Tighten them evenly so the mount sits flat, and recheck them after the first few trips. Look for cracks around the holes and for paint wear that suggests movement, since both point to a loosening mount.
- Test the spot by pressing on the mounted bracket
- Use washers on thin panels
- Recheck bolts after the first trips
Specifications
| Brand | RotoPAX |
|---|---|
| Model | RX-PM |
| UPC | 22099131007 |
| Finish | Black powder coated |
| Mounting options | Included base plate, or bolt directly through the bottom or down through the top |
Vehicle fitment
Make sure it suits your vehicle’s year, model and trim before buying.
This mount holds RotoPAX packs and is not a vehicle part, so confirm the surface you mount it to.
Installation notes
Bolt the mount through the base plate, or remove the plate and bolt directly through the bottom or down through the top. Confirm the mounting surface and fasteners are strong enough for the packs before drilling.
What’s included
The mount includes the base plate.
Not included: RotoPAX packs.









