Overview
The Ranch Hand BBF080BLSL is a black Legend Series rear bumper for 2008–2016 Ford F-250 Super Duty and F-350 Super Duty pickups.
The bumper is lighted and has sensor plugs. The factory receiver is retained, so the hitch does not have to come off. It is built from 4-inch schedule 40 pipe and diamond plate steel, and Ranch Hand rates it for a 1000 lb tongue weight and 10000 lb towing capacity.
The bumper is lighted and has sensor plugs, and the factory receiver stays in place, so the truck keeps its existing hitch while gaining the bumper’s lighting. It uses Legend Series construction, which is one-piece and fully welded.
Key features
- Lighted rear bumper
- Sensor plugs built in
- Factory receiver retained
- Frame-mounted, one-piece welded body
- Diamond plate steel and 4-inch schedule 40 pipe construction
- Black powder coat finish
- Made in the U.S.A.
Wiring and sensor checks
A lighted rear bumper ties into the truck’s electrical system, so the wiring harness and connectors should be routed away from moving parts, sharp edges and heat sources. Sensor plugs work with parking sensors and need to match the truck’s wiring before the install is finished. Testing each light and sensor before the truck returns to service avoids having to remove the bumper again.
Many trucks use a trailer lighting harness that runs close to the rear bumper, so check how it sits against the new frame. Route wires with split loom and secure them with clips so they are not pinched when the tailgate closes. If a light flickers, look first at ground connections and grommets before replacing the lamp itself.
- Test brake, turn and reverse functions
- Use dielectric grease on connectors
- Route wires with split loom and clips
- Check ground connections first when a light flickers
Specifications
| Brand | Ranch Hand |
|---|---|
| Part number | BBF080BLSL |
| UPC | 848917002621 |
| Product line | Legend Series |
| Position | Rear |
| Fitment type | Direct fit |
| Finish | Black powder coat |
| Receiver hitch | Factory receiver retained |
| Tongue weight rating | 1000 lb |
| Towing capacity | 10000 lb |
| Sensor plugs | Yes |
| Lighting | Lighted |
| D-ring mount | Not included |
| Origin | Made in the U.S.A. |
Vehicle fitment
It fits 2008–2016 Ford F-250 Super Duty and F-350 Super Duty pickups in Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT trims.
The Ford F-150, Super Duty trucks from 2017 on, and 2007 and earlier Super Duty models are outside this fit range. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The factory receiver stays in place, so no receiver removal is needed. The sensor plugs should be checked against your truck’s parking sensors before the install is finished.
What’s included
The bumper, with its lights and sensor plugs.
Not included: D-ring mounts.









