Overview
The Rampage 88605 is a textured black recovery rear bumper for 2007–2018 Jeep Wrangler (JK) two-door and four-door models.
The bumper is built from 3/16-inch steel with a durable powder coat finish, custom welded shackle mounts for 3/4-inch clevis D-rings, and two 4-inch light openings. It can be used with or without a hitch. Lights are not included.
Key features
- Textured black powder coat finish
- 3/16-inch steel plate design
- Custom welded shackle mounts
- Two 4-inch light openings
- Can be used with or without a hitch
- It is designed for off-road use and rock crawling.
Recovery use and upkeep
A rear recovery bumper takes most of the load when a vehicle is pulled out of a rut or up a rock ledge, so the mounts and welds matter as much as the steel itself. Shackle mounts welded into the plate spread the force across the bumper rather than the tow strap alone. Before a trip, look over the welds, the mounting bolts and the points where the bumper meets the frame for cracks or loose hardware.
Light openings are useful only when the lights are wired and mounted correctly. Run the wiring away from moving parts and tuck it so rocks and branches cannot pull it loose. If the powder coat chips at the edges or corners, touch it up early to slow rust on bare steel. Adding a receiver or tire carrier later changes the load on the bumper, so check the mounting hardware again after any change.
- Inspect welds and shackle mounts after rough trail days
- Retighten mounting bolts after the first few trail runs
- Touch up chips in the powder coat promptly
- Keep light wiring clear of moving parts
Specifications
| Brand | Rampage |
|---|---|
| Part number | 88605 |
| UPC | 873563006631 |
| Product line | Recovery Rear Bumper |
| Position | Rear |
| Fitment type | Direct fit |
| Material | Steel plate, 3/16-inch |
| Finish | Textured black powder coat |
| Light openings | Two 4-inch |
| Receiver hitch | Available |
| Tire carrier | Not included |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler (JK) two-door and four-door models.
It does not fit JL or pre-2007 Wrangler models. Match your Jeep’s year, model and trim to that range before ordering.
Installation notes
Lights are not included. Check the package contents against your installation before starting, and confirm D-ring mount inclusion for your order before fitting.
What’s included
The bumper, with its shackle mounts and light openings.
Not included: Lights. Confirm receiver hitch and D-ring inclusion for your order before installation.














