Overview
The Ranch Hand BBD100BLL is a black Legend Series rear bumper for the 2009 Dodge Ram 1500, the 2010 Dodge Ram 2500 and 3500, and the 2011–2018 Ram 2500 and 3500 pickups.
The bumper is built as a one-piece, fully welded unit that bolts to the frame, with a body of 4-inch schedule 40 pipe and diamond plate steel. Lights are built in. A 2-inch receiver is included and carries a 1000 lb tongue weight and 10000 lb towing capacity rating from Ranch Hand.
Key features
- One-piece, fully welded construction that mounts to the frame
- Diamond plate steel body on 4-inch schedule 40 pipe
- Built-in lighting
- Receiver hitch included
- Ratings of 1000 lb tongue weight and 10000 lb towing capacity
- Black powder coat for corrosion resistance
- Made in the USA
Before you install
A rear bumper on a half-ton or three-quarter-ton pickup does more than protect the tailgate. It is the point where the frame, the hitch and any rear accessories meet, so it carries loads that a standard bumper never sees. Before fitting one, look at what the truck already has mounted to the back: a factory receiver, a spare tire carrier, parking sensors or a backup camera. Each of these affects how the new unit sits and what has to be moved.
Frame-mounted bumpers add weight at the rear, so suspension and tire load deserve a check after installation. Re-check every mounting bolt after the first few trips, especially on rough roads, and look over the welds for hairline cracks during routine inspections. Keep the lights clean and check their seals once a season, since water and road grit are the usual causes of trouble.
Specifications
| Brand | Ranch Hand |
|---|---|
| Part number | BBD100BLL |
| UPC | 848917002577 |
| Product line | Legend Series |
| Position | Rear |
| Fitment type | Direct fit |
| Material | Steel: 4-inch schedule 40 pipe and diamond plate |
| Finish | Black powder coat |
| Receiver hitch | 2-inch, included |
| Tongue weight rating | 1000 lb |
| Towing capacity | 10000 lb |
| Lighting | Lighted |
| D-ring mount | Not included |
| Origin | Made in the USA |
Vehicle fitment
It fits the 2009 Dodge Ram 1500, the 2010 Dodge Ram 2500 and 3500, and the 2011–2018 Ram 2500 and 3500 pickups. Covered trims include Laramie, SLT, ST, Sport and TRX4 on the 2009 Ram 1500, and Laramie, Power Wagon, SLT, ST and SXT on the 2010 Ram 2500.
Vehicles outside its fitment, such as 2003–2008 Ram 1500 models, 2003–2009 Ram 2500 and 3500 models other than 2010, and any Ram 1500 from 2010 on, are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Remove the factory receiver before fitting the bumper. The D-ring mounts are not part of the kit, so budget for them separately.
What’s included
The bumper, with its 2-inch receiver.
Not included: D-ring mounts.









