Overview
The Rampage Recovery Rear Bumper with Tire Carrier in black, part number 78615, is a rear bumper for the 1997-2006 Jeep Wrangler (TJ) and the 1987-1995 Jeep Wrangler (YJ). It is built for off-road use and rock crawling.
The bumper is made from a 3/16 inch steel plate with a textured black powder coat finish, has custom welded shackle mounts with 3/4 inch clevis D-rings included, and has two 4 inch light openings. A receiver hitch and a tire carrier are part of the design.
Lights are needed to complete the bumper, since it has two 4 inch light receptacles.
Key features
- Rear bumper with tire carrier
- 3/16 inch steel plate design
- Textured black powder coat, a dual stage finish
- Custom welded shackle mounts with 3/4 inch clevis D-rings included
- Two 4 inch light openings
- Receiver hitch included in the design
- Lights are not included
- Direct fit
Recovery and off-road use
A rear bumper with a tire carrier takes the impact of trail obstacles and also serves as a recovery point, so its mounts and the body structure behind them carry real loads. Shackle mounts should be used with rated recovery gear only, and the hitch and carrier should be checked for movement after rough use. Heavy loads change how the rear of the vehicle handles on steep or uneven ground.
Inspect the welds, bolts and shackle mounts periodically for cracks or looseness, particularly after recovery or sharp impacts. Keep the light openings sealed against water and dirt if lights are fitted later, and check that wiring is routed away from moving parts. Corrosion can start at bolt holes, so touch up chips in the powder coat promptly.
- Use rated shackles and straps for recovery
- Inspect the hitch pin and retainer regularly
- Touch up chips before rust starts
Specifications
| Brand | Rampage |
|---|---|
| Part number | 78615 |
| UPC | 873563008116 |
| Product type | Rear bumper |
| Position | Rear |
| Material | Steel plate, 3/16 inch |
| Finish | Textured black powder coat |
| D-ring mount | Included |
| D-rings | 3/4 inch clevis |
| Light openings | Two, 4 inch |
| Receiver hitch | Yes |
| Tire carrier | Yes |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997-2006 Jeep Wrangler (TJ) in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims, and the 1987-1995 Jeep Wrangler (YJ) in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims. Confirm your vehicle’s year, model and trim before ordering, since JK, JL, LJ and earlier CJ models are not covered.
The list does not include the Wrangler JK, JL or the earlier CJ models, or the Wrangler LJ. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A bumper with a tire carrier is heavy, so use proper lifting equipment and a second person. Torque all fasteners to the specified values and re-check them after the first miles of driving.
Use rated shackles and recovery gear with the shackle mounts, and follow the included instructions for hitch use. Confirm the hitch and recovery ratings for your load before use.
What’s included
- Rear bumper with tire carrier
- Welded shackle mounts
- 3/4 inch clevis D-rings
- Receiver hitch
Not included: lights; the two 4 inch light openings are for lights supplied separately.









